[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 46 > < TAKE 384 >

384 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.PKRelAttribute.ForeignEntity	ARCCore	ClassMember	See -ForeignEntity-.
ARCCore.PKRelAttribute.EnforceReferentialIntegrity	ARCCore	ClassMember	See -EnforceReferentialIntegrity-.
ARCCore.PKRelAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.IsObligatory	ARCCore	ClassMember	See -IsObligatory-.
ARCCore.PKTypeAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP	ARCCore	Class	IP = IProperty.
ARCCore.IP.TryGetV Overload2	ARCCore	ClassMember	The actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.ToString	ARCCore	ClassMember	The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.TrySetPP	ARCCore	ClassMember	SetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IP.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.OnTrySetP	ARCCore	ClassMember	Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.Item	ARCCore	ClassMember	Offers string-based direct indexing.
ARCCore.IP.Keys	ARCCore	ClassMember	Returns all the keys for this instance.
ARCCore.IP.Values	ARCCore	ClassMember	Returns all the values (all the properties) for this instance.
ARCCore.IP.Logger	ARCCore	ClassMember	Describes a logger.
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific	ARCCore	ClassMember	All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.BaseAttribute	ARCCore	Class	Instances of this class are used as source of documentation and data for the API.
ARCCore.BaseAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.ClassAttribute	ARCCore	Class	Describes a class.
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.IKIP	ARCCore	Class	Container class for key (-IK-), and value (-IP-).
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.CardinalityExtensions	ARCCore	Class
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.IKCoded.FromCacheEncoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.IKCoded.FromCacheUnencoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.IKType
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.TryValidateAndParse	ARCCore	ClassMember	Parses the value according to specifications for this property key.
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.__enum	ARCCore	ClassMember	This information is also found as EnumMember.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PKHTMLAttribute	ARCCore	Class	Contains pointer to HTML encoder for a property.
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PKHTMLAttribute.Encode	ARCCore	ClassMember	Encodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PKHTMLAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.DoNotLogAtAll	ARCCore	ClassMember	See -DoNotLogAtAll-.
ARCCore.PKHTMLAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKLogAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.PKRelAttribute	ARCCore	Class	Describes relationships between entities (between tables in RDBMS terms).
ARCCore.PKHTMLAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute	ARCCore	Class	Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKTypeAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKTypeAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.Type	ARCCore	ClassMember	See -Type-.
ARCCore.PKTypeAttribute.StandardValidatorAndParser	ARCCore	ClassMember	Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.PKTypeAttribute.Cardinality	ARCCore	ClassMember	See -Cardinality-.
ARCCore.PKTypeAttribute.StandardCleaner	ARCCore	ClassMember	Returns a cleaner for well known types like bool
ARCCore.PKTypeAttribute.DefaultValue	ARCCore	ClassMember	See -DefaultValue-.
ARCCore.IP.Inc	ARCCore	ClassMember	Increments given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.HandleException	ARCCore	ClassMember	Note that most relevant to use for -PConcurrent-.
ARCCore.IP.Dec	ARCCore	ClassMember	Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.Initialize	ARCCore	ClassMember	Note that has a default implementation (doing nothing).
ARCCore.IP.Log	ARCCore	ClassMember	The 'final' overload of -Log- that is called by the other overloads.
ARCCore.IP.AssertIntegrity	ARCCore	ClassMember	See -TryAssertIntegrity-.
ARCCore.IP.LogExecuteTime	ARCCore	ClassMember	Times the execution of the given function and logs details about elapsed time.
ARCCore.IP.TryAssertIntegrity	ARCCore	ClassMember	Asserts the integrity of this entity.
ARCCore.IP.TryGetP Overload1	ARCCore	ClassMember	Gets a single property for this object
ARCCore.IP.TrySetP	ARCCore	ClassMember	Set property regardless of whether exists or not.
ARCCore.IP.ToPropertyStream	ARCCore	ClassMember	Turns object into a -PropertyStream-
ARCCore.IP.TryGetV Overload1	ARCCore	ClassMember	The actual 'unpacking' of the object.
ARCCore.IP.ToJSONSerializeable	ARCCore	ClassMember	Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.DeepCopy	ARCCore	ClassMember	Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.IP.GetValueForJSONSerializer	ARCCore	ClassMember	Makes the following modifications to the data:
ARCCore.IP.AddPV	ARCCore	ClassMember	Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.IP.TryGetP Overload2	ARCCore	ClassMember	Note that not relevant for single-value properties like -PValue-.
ARCCore.IP.AddP	ARCCore	ClassMember	Adds a property for this object.
ARCCore.IP.GetPV	ARCCore	ClassMember	Gets a single property's value for this object. Returns default value if not successful.
ARCCore.IP.AddOrUpdateP	ARCCore	ClassMember	Duplicates functionality of SetP.
ARCCore.IP.TryGetPV	ARCCore	ClassMember	Gets a single property's value for the given property key.
ARCCore.IP.GetOrAddPV	ARCCore	ClassMember	Gets value. If not set then value will be added
ARCCore.IP.EnumeratorReturnsEmptyCollection	ARCCore	ClassMember	Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not.
ARCCore.IP.GetP	ARCCore	ClassMember	Gets a single property for this object.
ARCCore.P	ARCCore	Class	'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict	ARCCore	ClassMember	All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.P.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract	ARCCore	ClassMember	All relevant -IP--derived types (except the interface -IP- itself) known to the application.
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.AllIPDerivedTypesDict	ARCCore	ClassMember	Offers for lookup of a type given its string representation.
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.IP.AllIPDerivedTypesDictIKType	ARCCore	ClassMember	Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PExact<EnumType>	ARCCore	Class	Very -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PExact<EnumType>..ctor	ARCCore	ClassMember	Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PExact<EnumType>.Storage	ARCCore	ClassMember	Uses int-value of -__enum- minus 1 as index.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PII	ARCCore	Class	PII = property for storing individual items.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PII.TryGetV	ARCCore	ClassMember	Since value is stored in keys, we need to override this method.
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.PII.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PValue<T>.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.IPII	ARCCore	Class	Future expansion, using different classes for storing, not only -PII-.
ARCCore.PValue<T>.TryGetV	ARCCore	ClassMember	Supports duck typing.
ARCCore.IIKII	ARCCore	Class	Related to -PII-, property for storing individual items
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ClientUpdatePosition.IsAtEndOfStream	ARCCore	ClassMember	Necessary in order to implement -AdHocQuery-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance	ARCCore	ClassMember	See also -ClientDatastoreIsEmpty.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance	ARCCore	ClassMember	See also -OnlyNewDataIsRequested.
ARCCore.ConnectionInstruction	ARCCore	Class	The instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.ConnectionInstruction.Initialize	ARCCore	ClassMember	Initializes to sane values.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.UtilCore.AssertCurrentlyStartingUp	ARCCore	ClassMember	Normally called from non-thread safe methods that should be run single-threaded at application startup only.
ARCCore.UtilCore.DoubleTryParse	ARCCore	ClassMember	Note that treats ',' (comma) as decimal point (not as thousands separator).
ARCCore.UtilCore.EnumTryParse	ARCCore	ClassMember	Same as the inbuilt .NET method -TryParse- but with some additional checks.
ARCCore.UtilCore.TryGetTypeFromStringNoCache	ARCCore	ClassMember	See -TryGetTypeFromStringFromCache- for documentation.
ARCCore.UtilCore.TryGetTypeFromStringFromCache	ARCCore	ClassMember	Corresponding method for creating string-representation of type is -ToStringDB-.
ARCCore.UtilCore.GetExceptionChainAsString	ARCCore	ClassMember	Follows the chain of InnerException and returns types as comma-separated string
ARCCore.UtilCore.GetExeptionDetails	ARCCore	ClassMember	Gives as much information about exception as possible.
ARCCore.UtilCore.DateTimeTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.ValidDateTimeFormats	ARCCore	ClassMember	'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd'
ARCCore.UtilCore.ValidTimeSpanFormats	ARCCore	ClassMember	'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff'
ARCCore.REx	ARCCore	Class	REx = 'TooDeepRecursiveDepthException'
ARCCore.REx.Inc	ARCCore	ClassMember	Increases recursive count.
ARCCore.REx.Dec	ARCCore	ClassMember	This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-.
ARCCore.InvalidTypeException	ARCCore	Class
ARCCore.InvalidTypeException.AssertAssignable	ARCCore	ClassMember	Asserts that expectedType.IsAssignableFrom(foundType)
ARCCore.InvalidTypeException.AssertEquals	ARCCore	ClassMember	Asserts that expectedType.Equals(foundType)
ARCCore.ClassAttributeP.ClassType	ARCCore	EnumMember	The actual type that we are a -ClassAttribute- for
ARCCore.ClassAttributeP.BaseTypes	ARCCore	EnumMember	The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object'
ARCCore.ClassAttributeP.SubTypes	ARCCore	EnumMember	Direct and indirect sub types of this class.
ARCCore.ClassAttributeP.Interfaces	ARCCore	EnumMember	All interfaces that this class and its base classes implement
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented	ARCCore	EnumMember	All interfaces that this class directly implements.
ARCCore.ClassAttributeP.CorrespondingEnumType	ARCCore	EnumMember	Only relevant when implements -IP-.
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage	ARCCore	EnumMember	Only relevant when implements -IP- and when a -CorrespondingEnumType- is found.
ARCCore.ClassMemberAttributeP	ARCCore	Enum	Describes class -ClassMemberAttribute-.
ARCCore.ARComponents.ARCDoc	ARCCore	EnumMember	A library supporting documentation and demonstrating usage of AgoRapide.
ARCCore.ARComponents.ARCQuery	ARCCore	EnumMember	ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs.
ARCCore.ARComponents.ARCSync	ARCCore	EnumMember	(Not implemented as of March 2020)
ARCCore.ARComponents.ARCSec	ARCCore	EnumMember	(Not implemented as of March 2020)
ARCCore.ARComponents.ARCAPI	ARCCore	EnumMember	A library providing an API on top of the -PropertyStream-.
ARCCore.ARComponents.ARAAPI	ARCCore	EnumMember	The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc.
ARCCore.ARConcepts	ARCCore	Enum	The overarching concepts upon which AgoRapide is built.
ARCCore.ARConcepts.GettingStarted	ARCCore	EnumMember	AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET Standard 2.1.
ARCCore.PValue<T>.ConvertObjectToString	ARCCore	ClassMember	Converts object to string.
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.PValue<T>.ToString	ARCCore	ClassMember	Do no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.PValue<T>.DeepCopy	ARCCore	ClassMember	Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.PValue<T>..ctor	ARCCore	ClassMember	Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.PValueEmpty	ARCCore	Class	Represents the 'no value'.
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.PValueEmpty.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.PValueEmpty.ToPropertyStream	ARCCore	ClassMember	Typicall return value could be something like
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested	ARCCore	ClassMember	Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.ActualConnection	ARCCore	Class	The actual connection, its internal state, queue for sending and so on.
ARCCore.ClientUpdatePosition.IsGoBack	ARCCore	ClassMember	Has to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.StoreFailure	ARCCore	ClassMember	Stores a 'ParseOrStoreFailure'-object.
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.TryStore	ARCCore	ClassMember	Stores the given -PropertyStreamLineParsed- in the given storage object.
ARCCore.PropertyStreamLine.Decode	ARCCore	ClassMember	Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.PropertyStreamLine.AllowedKeyChars	ARCCore	ClassMember	Allowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.TryParseDirectToIP	ARCCore	ClassMember	Parses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.PropertyStreamLine.AllowedValueChars	ARCCore	ClassMember	Allowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.TryParseDirectToProperty	ARCCore	ClassMember	Parses direct to a given property value.
ARCCore.PropertyStreamLineParsed	ARCCore	Class	Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.PropertyStreamLineParsed.ToString	ARCCore	ClassMember	Note relatively complex operation of 'restoring' original property stream line.
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.PropertyStreamLineParsed.TryParse	ARCCore	ClassMember	Generate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.PropertyStreamLineParsed.IsComment	ARCCore	ClassMember	Signifies that property stream line given for parsing started with '//' (two forward slashes).
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.PropertyStreamLineParsed.Keys	ARCCore	ClassMember	The keys part of the -PropertyStreamLine-, that is, everything before ' = '.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.PropertyStreamLineParsed.Value	ARCCore	ClassMember	The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.StreamProcessor	ARCCore	Class	Implements the storage mechanism for AgoRapide.
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.StreamProcessor.CreateBareBonesInstance	ARCCore	ClassMember	Creates a bare-bones -StreamProcessor- instance.
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.Initialize	ARCCore	ClassMember	Initializes this instance of -StreamProcessor-
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.UtilCore.TimeSpanTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC	ARCCore	ClassMember	By default AgoRapide operates only with UTC time.
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.UtilCore.DateTimeNow	ARCCore	ClassMember	Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.UtilCore.CurrentlyStartingUp	ARCCore	ClassMember	Called once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.UtilCore.Assemblies	ARCCore	ClassMember	All relevant assemblies for application.
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.UtilCore.Culture	ARCCore	ClassMember	The general culture used for parsing.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.UtilCore.Culture_en_US	ARCCore	ClassMember	Used by -DoubleTryParse-.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.UtilCore.DefaultAgoRapideEncoding	ARCCore	ClassMember	The standard encoding used for text (UTF8).
ARCCore.TValue	ARCCore	Class	Placeholder for any class type suitable as generic type parameter -PValue-.
ARCCore.StreamProcessor+StorageFile.Length	ARCCore	ClassMember	Wrongly placed. Belongs to each individual revision file.
ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException	ARCCore	Class	Helps to clean up any confusion about which -BaseAttribute- to use in a given concept.
ARCCore.StreamProcessor+StorageFile.Properties	ARCCore	ClassMember	Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on.
ARCCore.PK+BasePKAttributeNotFoundException<T>	ARCCore	Class	Explains how to implement a given -BasePKAttribute- for an enum
ARCCore.BaseAttributeP	ARCCore	Enum	Describes class -BaseAttribute-.
ARCCore.PK+PKBoolPair	ARCCore	Class	Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection).
ARCCore.BaseAttributeP.Description	ARCCore	EnumMember	The description for the attribute, like this description
ARCCore.PK+PKBoolPair.TrulyInitialized	ARCCore	ClassMember	Not used currently (May 2020). Useful for debugging purposes
ARCCore.BaseAttributeP.LongDescription	ARCCore	EnumMember	The long (detailed) description for the attribute.
ARCCore.StreamProcessor+StorageFile	ARCCore	Class
ARCCore.ClassAttributeP	ARCCore	Enum	Describes class -ClassAttribute-.
ARCCore.StreamProcessor+StorageFile.Filepath	ARCCore	ClassMember	Complete path to file
ARCCore.ClassAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.StreamProcessor+StorageFile.Filename	ARCCore	ClassMember	Filename: Main file name, like 2020-04-03 08:42
ARCCore.ClassAttributeP.ClassNamespace	ARCCore	EnumMember	The namespace for -ClassType-.
ARCCore.ClassMemberAttributeP.DeclaringType	ARCCore	EnumMember	The actual MemberInfo.DeclaringType.
ARCCore.EnumAttributeP.CorrespondingClass	ARCCore	EnumMember	Only relevant when -PropertyKeyEnum-.
ARCCore.ClassMemberAttributeP.MethodName	ARCCore	EnumMember	The actual MemberInfo.Name.
ARCCore.EnumMemberAttributeP	ARCCore	Enum	Describes class -EnumMemberAttribute-.
ARCCore.ClassMemberAttributeP.MethodSignature	ARCCore	EnumMember	The actual MemberInfo.ToString.
ARCCore.EnumMemberAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.EnumAttributeP	ARCCore	Enum	Describes class -EnumAttribute-.
ARCCore.EnumMemberAttributeP.EnumMember	ARCCore	EnumMember	The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for
ARCCore.EnumAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.ARComponents	ARCCore	Enum	Contains short descriptions of the different 'official' AgoRapide components.
ARCCore.EnumAttributeP.EnumNamespace	ARCCore	EnumMember	The namespace for -EnumType-.
ARCCore.ARComponents.ARCCore	ARCCore	EnumMember	A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to.
ARCCore.EnumAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.ARComponents.ARADB	ARCCore	EnumMember	An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-).
ARCCore.EnumAttributeP.AREnumType	ARCCore	EnumMember	Note that will default to -__invalid- if not explicit set.
ARCCore.ARComponents.ARAClient	ARCCore	EnumMember	A template application for a -Client- (linking to -ARCCore-).
ARCCore.ARConcepts.MemoryConsumption	ARCCore	EnumMember	A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption.
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages	ARCCore	EnumMember	The abstraction level in AgoRapide is very high.
ARCCore.ARConcepts.Indexing	ARCCore	EnumMember	In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-.
ARCCore.ARConcepts.ExposingApplicationState	ARCCore	EnumMember	The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool.
ARCCore.ARConcepts.CoreDBSynchronization	ARCCore	EnumMember	The concept of how multiple -CoreDB- instances synchronizes their data.
ARCCore.ARConcepts.LinkInsertionInDocumentation	ARCCore	EnumMember	Documentation with links is much easier to read.
ARCCore.ARConcepts.SingleThreadedCode	ARCCore	EnumMember	Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-).
ARCCore.ARConcepts.TryPatternAndNull	ARCCore	EnumMember	AgoRapide uses non-nullable reference types as default throughout the system
ARCCore.ARConcepts.DataRetention	ARCCore	EnumMember	The concept of when to delete old data (if deemed necessary).
ARCCore.AREnumType	ARCCore	Enum	Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-.
ARCCore.ARConcepts.NoRealDeletion	ARCCore	EnumMember	AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data).
ARCCore.AREnumType.PropertyKeyEnum
ARCCore.ARConcepts.ManyToManyRelations	ARCCore	EnumMember	-ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table).
ARCCore.AREnumType.OrdinaryEnum	ARCCore	EnumMember	Designates "Ordinary" enums used for indicating range of valid values for a given key
ARCCore.ARConcepts.Documentation	ARCCore	EnumMember	Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible.
ARCCore.AREnumType.DocumentationOnlyEnum	ARCCore	EnumMember	Designates enums that provide a central repository of explanation of terms that are not present in the C# code.
ARCCore.ARNodeType	ARCCore	Enum	Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-.
ARCCore.PKLogAttributeP.DoNotLogAtAll	ARCCore	EnumMember	Originates from -DoNotLogAtAll-.
ARCCore.ARNodeType.CoreDB	ARCCore	EnumMember	A node containing the core or central database.
ARCCore.PKLogAttributeP.CountInterval	ARCCore	EnumMember	For a value of n, log only every n'th time the property is changed.
ARCCore.ARNodeType.ArmDB	ARCCore	EnumMember	A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only)
ARCCore.PKLogAttributeP.TimeInterval	ARCCore	EnumMember	Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-.
ARCCore.ARNodeType.Client	ARCCore	EnumMember	An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-.
ARCCore.PKRelAttributeP	ARCCore	Enum	Describes class -PKRelAttribute-.
ARCCore.Cardinality	ARCCore	Enum	Describes how multiple instances of a property is supposed to be handled.
ARCCore.PKRelAttributeP.ForeignEntity	ARCCore	EnumMember	The type of foreign entity that this property points to.
ARCCore.Cardinality.HistoryOnly	ARCCore	EnumMember	The default value.
ARCCore.PKRelAttributeP.EnforceReferentialIntegrity	ARCCore	EnumMember	If TRUE then referential integrity will be enforced by -TryStore-.
ARCCore.Cardinality.WholeCollection	ARCCore	EnumMember	Values are always set as a whole (there is no need or no meaning in setting or deleting individual items)
ARCCore.PKTypeAttributeP	ARCCore	Enum	Describes class -PKTypeAttribute-.
ARCCore.Cardinality.IndividualItems	ARCCore	EnumMember	Values are supposed to be set and 'deleted' individually.
ARCCore.PKTypeAttributeP.Type	ARCCore	EnumMember	The type of this Property.
ARCCore.ARConcepts.PropertyStream	ARCCore	EnumMember	AgoRapide, the 'streams-of-water' database".
ARCCore.ARConcepts.TaggingOfPropertyKeys	ARCCore	EnumMember	The concept of specifying in a single place all relevant information about a given property (data field).
ARCCore.ARConcepts.PropertyAccess	ARCCore	EnumMember	The general mechanism for accessing properties of objects in AgoRapide.
ARCCore.ARConcepts.AvoidingRepetition	ARCCore	EnumMember	Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide.
ARCCore.ARConcepts.AgoRapideHistory	ARCCore	EnumMember	AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language).
ARCCore.ARConcepts.AdHocQuery	ARCCore	EnumMember	The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-.
ARCCore.ARConcepts.StandardAgoRapideCode	ARCCore	EnumMember	Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code)
ARCCore.ARConcepts.ApplicationSpecificCode	ARCCore	EnumMember	Code specific for an end-application.
ARCCore.PP.Valid	ARCCore	EnumMember	Timestamp when property was last known to be (still) valid
ARCCore.PP.Vid	ARCCore	EnumMember	Validator id, that is entity which set -Valid- for this property.
ARCCore.PP.Invalid	ARCCore	EnumMember	Timestamp when property was invalidated / 'deleted'.
ARCCore.PP.Iid	ARCCore	EnumMember	Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01').
ARCCore.PP.ExceptionText	ARCCore	EnumMember	General property for logging of exceptions, usually set through -HandleException-.
ARCCore.PConcurrentP	ARCCore	Enum	Describes class -PConcurrent-.
ARCCore.PConcurrentP.Heartbeat	ARCCore	EnumMember
ARCCore.ActualConnectionP	ARCCore	Enum	Describes class -ActualConnection-.
ARCCore.ActualConnectionP.Id	ARCCore	EnumMember	When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection.
ARCCore.ActualConnectionP.ConnectionInstruction	ARCCore	EnumMember	Only relevant when we are an -Outgoing-.
ARCCore.ActualConnectionP.ConnectionDirection	ARCCore	EnumMember
ARCCore.ActualConnectionP.CountReceiveMessage	ARCCore	EnumMember
ARCCore.ActualConnectionP.CountSendMessage	ARCCore	EnumMember
ARCCore.ActualConnectionP.ClientUpdatePosition	ARCCore	EnumMember	Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side).
ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient	ARCCore	EnumMember	Originates from -Subscription-.
ARCCore.ActualConnectionP.ClosingReason	ARCCore	EnumMember	Reason why this connection was closed
ARCCore.MultipleConnectionUsage.RoundRobin	ARCCore	EnumMember	This connection to be used in a turn based system, together with other connections with -RoundRobin-.
ARCCore.MultipleConnectionUsage.Simultaneous	ARCCore	EnumMember	This connection to be used simultaneously with other connections with -Simultaneous-
ARCCore.StreamProcessorP	ARCCore	Enum	Describes class -StreamProcessor-.
ARCCore.StreamProcessorP.LocalStorageFolder	ARCCore	EnumMember	The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar
ARCCore.StreamProcessorP.IndividualStorageFileSize	ARCCore	EnumMember	Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-.
ARCCore.StreamProcessorP.CurrentlyInitializing	ARCCore	EnumMember	Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them).
ARCCore.StreamProcessorP.ClientUpdatePositionPath	ARCCore	EnumMember	Complete path to file containing -ClientUpdatePosition-.
ARCCore.StreamProcessorP.ClientUpdatePosition	ARCCore	EnumMember	Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side).
ARCCore.StreamProcessorP.IncomingConnectionsPortNo	ARCCore	EnumMember	If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-).
ARCCore.StreamProcessorP.UnderClosure	ARCCore	EnumMember	Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope
ARCCore.StreamProcessorP.WriteToConsole	ARCCore	EnumMember	If true then incoming data (from other nodes will be written to console.
ARCCore.StreamProcessorP.Timestamp	ARCCore	EnumMember	The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-.
ARCCore.StreamProcessorP.TimestampIsOld	ARCCore	EnumMember	A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date.
ARCCore.StreamProcessorP.TimestampResolution	ARCCore	EnumMember	The time interval between each timestamp update in the -PropertyStream-.
ARCCore.StreamProcessorP.DoNotStoreLocally	ARCCore	EnumMember	For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-.
ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally	ARCCore	EnumMember	Means 'do not store local origin locally but wait until it gets confirmed by core storage'.
ARCDoc.DocFrag.ToHTMLSimpleSingle	ARCDoc	ClassMember	Alternative ('override') to -ToHTMLSimpleSingle-.
ARCDoc.DocFrag.TryGetV	ARCDoc	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCDoc.DocFrag.ToString	ARCDoc	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCDoc.DocFragCollection	ARCDoc	Class	Contains a collection of -DocFrag- objects.
ARCDoc.DocFragCollection.Create	ARCDoc	ClassMember	Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies.

Generated 2026-11-04 21:14:54.643 UTC