[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 4 > < TAKE 384 >

384 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.IKIP.TryAssertTypeIntegrity	ARCCore	ClassMember	Asserts that value is of correct type as specified by the key.
ARCCore.BasePKAttribute	ARCCore	Class	The class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.BasePKAttribute.GetAttributes	ARCCore	ClassMember	Note that illegal to call for other than -PropertyKeyEnum-.
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.BasePKAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.ClassAttribute	ARCCore	Class	Describes a class.
ARCCore.IKCoded.AllowedEncodedCharacters	ARCCore	ClassMember	The character set 'A...Za...z0...9-_().,='.
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.ClassMemberAttribute	ARCCore	Class	Describes a member of a class (a method).
ARCCore.IKType
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.ParseResult.ErrorResponse	ARCCore	ClassMember	Will be null if Result is set
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.PK.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCCore.PK.TryValidateAndParse	ARCCore	ClassMember	Parses the value according to specifications for this property key.
ARCCore.EnumMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.TryGetFromTypeAndFieldName Overload1	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCCore.PK.GetAllPKForEntityType	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.PK.GetAllPKForEntityTypeString	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.PK.CorrespondingClass	ARCCore	ClassMember	Returns -CorrespondingClass- based on -__enum-.
ARCCore.IKIP	ARCCore	Class	Container class for key (-IK-), and value (-IP-).
ARCCore.PK.Cleaner	ARCCore	ClassMember	Cleanup of values, to be used before value is attempted validated.
ARCCore.IKIP.AssertTypeIntegrity	ARCCore	ClassMember	See -TryAssertTypeIntegrity- for documentation.
ARCCore.PK.AllEnums	ARCCore	ClassMember	All enums for the whole application.
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.PKHTMLAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.IHTMLEncoder	ARCCore	Class	Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.PKLogAttribute	ARCCore	Class	Explains how logging of changes to a property should be done.
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PKRelAttribute.EnforceReferentialIntegrity	ARCCore	ClassMember	See -EnforceReferentialIntegrity-.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PKRelAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.PKTypeAttribute	ARCCore	Class	Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PKTypeAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKHTMLAttribute	ARCCore	Class	Contains pointer to HTML encoder for a property.
ARCCore.IP.HandleException	ARCCore	ClassMember	Note that most relevant to use for -PConcurrent-.
ARCCore.PKHTMLAttribute.Encode	ARCCore	ClassMember	Encodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.IP.Initialize	ARCCore	ClassMember	Note that has a default implementation (doing nothing).
ARCCore.PKHTMLAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IP.AssertIntegrity	ARCCore	ClassMember	See -TryAssertIntegrity-.
ARCCore.PKHTMLAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IP.TryAssertIntegrity	ARCCore	ClassMember	Asserts the integrity of this entity.
ARCCore.PKRelAttribute	ARCCore	Class	Describes relationships between entities (between tables in RDBMS terms).
ARCCore.IP.TrySetP	ARCCore	ClassMember	Set property regardless of whether exists or not.
ARCCore.PKRelAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IP.TryGetV Overload1	ARCCore	ClassMember	The actual 'unpacking' of the object.
ARCCore.PKRelAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IP.DeepCopy	ARCCore	ClassMember	Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.PKRelAttribute.ForeignEntity	ARCCore	ClassMember	See -ForeignEntity-.
ARCCore.IP.AddPV	ARCCore	ClassMember	Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.PKTypeAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IP.TryGetP Overload2	ARCCore	ClassMember	Note that not relevant for single-value properties like -PValue-.
ARCCore.PKTypeAttribute.Type	ARCCore	ClassMember	See -Type-.
ARCCore.IP.GetPV	ARCCore	ClassMember	Gets a single property's value for this object. Returns default value if not successful.
ARCCore.PKTypeAttribute.Cardinality	ARCCore	ClassMember	See -Cardinality-.
ARCCore.IP.TryGetPV	ARCCore	ClassMember	Gets a single property's value for the given property key.
ARCCore.PKTypeAttribute.DefaultValue	ARCCore	ClassMember	See -DefaultValue-.
ARCCore.IP.EnumeratorReturnsEmptyCollection	ARCCore	ClassMember	Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not.
ARCCore.IP	ARCCore	Class	IP = IProperty.
ARCCore.P	ARCCore	Class	'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.IP.TryGetV Overload2	ARCCore	ClassMember	The actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.P.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IP.Inc	ARCCore	ClassMember	Increments given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IP.Dec	ARCCore	ClassMember	Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.IP.AllIPDerivedEntityCollectionClassesDict	ARCCore	ClassMember	All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.PExact<EnumType>	ARCCore	Class	Very -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract	ARCCore	ClassMember	All relevant -IP--derived types (except the interface -IP- itself) known to the application.
ARCCore.PExact<EnumType>..ctor	ARCCore	ClassMember	Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.IP.AllIPDerivedTypesDict	ARCCore	ClassMember	Offers for lookup of a type given its string representation.
ARCCore.PExact<EnumType>.Storage	ARCCore	ClassMember	Uses int-value of -__enum- minus 1 as index.
ARCCore.IP.AllIPDerivedTypesDictIKType	ARCCore	ClassMember	Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.PII	ARCCore	Class	PII = property for storing individual items.
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.PValueEmpty	ARCCore	Class	Represents the 'no value'.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.PValueEmpty.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested	ARCCore	ClassMember	Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.PValueEmpty.ToPropertyStream	ARCCore	ClassMember	Typicall return value could be something like
ARCCore.ClientUpdatePosition.IsGoBack	ARCCore	ClassMember	Has to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.ActualConnection	ARCCore	Class	The actual connection, its internal state, queue for sending and so on.
ARCCore.ClientUpdatePosition.IsAtEndOfStream	ARCCore	ClassMember	Necessary in order to implement -AdHocQuery-.
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance	ARCCore	ClassMember	See also -ClientDatastoreIsEmpty.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance	ARCCore	ClassMember	See also -OnlyNewDataIsRequested.
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.ConnectionInstruction	ARCCore	Class	The instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.BaseAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.BaseAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.CardinalityExtensions	ARCCore	Class
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.IKCoded.FromCacheEncoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromCacheUnencoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.ParseResult.Result	ARCCore	ClassMember	Will be null if ErrorResponse is set.
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.IP.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.OnTrySetP	ARCCore	ClassMember	Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.TryGetP Overload1	ARCCore	ClassMember	Gets a single property for this object
ARCCore.IP.ToPropertyStream	ARCCore	ClassMember	Turns object into a -PropertyStream-
ARCCore.IP.Logger	ARCCore	ClassMember	Describes a logger.
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific	ARCCore	ClassMember	All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.PValue<T>.TrySetP	ARCCore	ClassMember	NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.PValue<T>.TryGetV	ARCCore	ClassMember	Supports duck typing.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PropertyStreamLineParsed.Value	ARCCore	ClassMember	The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.StreamProcessor	ARCCore	Class	Implements the storage mechanism for AgoRapide.
ARCCore.StreamProcessor.CreateBareBonesInstance	ARCCore	ClassMember	Creates a bare-bones -StreamProcessor- instance.
ARCCore.StreamProcessor.Initialize	ARCCore	ClassMember	Initializes this instance of -StreamProcessor-
ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections	ARCCore	ClassMember	Not relevant for -CoreDB-.
ARCCore.StreamProcessor.StartTCPIPCommunication	ARCCore	ClassMember	Starts communicating over TCP/IP.
ARCCore.StreamProcessor.ReceiveAndDistribute	ARCCore	ClassMember	Process all messages in receive queue.
ARCCore.StreamProcessor.AddTimestampAsRequired	ARCCore	ClassMember	Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-.
ARCCore.StreamProcessor.ReadStorageFile	ARCCore	ClassMember	Reads one storage file from disk
ARCCore.StreamProcessor.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.StreamProcessor.OutsideLocalReceiver	ARCCore	ClassMember	The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class.
ARCCore.PropertyStreamLineWithOrigin	ARCCore	Class	The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source).
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PK.ValidatorAndParser	ARCCore	ClassMember	Validates and parses a value.
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.__enum	ARCCore	ClassMember	This information is also found as EnumMember.
ARCCore.PKLogAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PKLogAttribute.DoNotLogAtAll	ARCCore	ClassMember	See -DoNotLogAtAll-.
ARCCore.PKLogAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.StandardValidatorAndParser	ARCCore	ClassMember	Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.PKTypeAttribute.StandardCleaner	ARCCore	ClassMember	Returns a cleaner for well known types like bool
ARCCore.PKTypeAttribute.IsObligatory	ARCCore	ClassMember	See -IsObligatory-.
ARCCore.PKTypeAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.Log	ARCCore	ClassMember	The 'final' overload of -Log- that is called by the other overloads.
ARCCore.IP.LogExecuteTime	ARCCore	ClassMember	Times the execution of the given function and logs details about elapsed time.
ARCCore.IP.ToString	ARCCore	ClassMember	The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.TrySetPP	ARCCore	ClassMember	SetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IP.ToJSONSerializeable	ARCCore	ClassMember	Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.GetValueForJSONSerializer	ARCCore	ClassMember	Makes the following modifications to the data:
ARCCore.IP.AddP	ARCCore	ClassMember	Adds a property for this object.
ARCCore.IP.AddOrUpdateP	ARCCore	ClassMember	Duplicates functionality of SetP.
ARCCore.IP.GetOrAddPV	ARCCore	ClassMember	Gets value. If not set then value will be added
ARCCore.IP.GetP	ARCCore	ClassMember	Gets a single property for this object.
ARCCore.IP.IsValid	ARCCore	ClassMember	Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.Item	ARCCore	ClassMember	Offers string-based direct indexing.
ARCCore.IP.Keys	ARCCore	ClassMember	Returns all the keys for this instance.
ARCCore.IP.Values	ARCCore	ClassMember	Returns all the values (all the properties) for this instance.
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PII.TryGetV	ARCCore	ClassMember	Since value is stored in keys, we need to override this method.
ARCCore.PII.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IPII	ARCCore	Class	Future expansion, using different classes for storing, not only -PII-.
ARCCore.IIKII	ARCCore	Class	Related to -PII-, property for storing individual items
ARCCore.PValue<T>.ConvertObjectToString	ARCCore	ClassMember	Converts object to string.
ARCCore.PValue<T>.ToString	ARCCore	ClassMember	Do no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.PValue<T>.DeepCopy	ARCCore	ClassMember	Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy
ARCCore.PValue<T>..ctor	ARCCore	ClassMember	Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.ConnectionInstruction.Initialize	ARCCore	ClassMember	Initializes to sane values.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.PropertyStreamLineParsed.ToString	ARCCore	ClassMember	Note relatively complex operation of 'restoring' original property stream line.
ARCCore.PropertyStreamLineParsed.TryParse	ARCCore	ClassMember	Generate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.PropertyStreamLineParsed.IsComment	ARCCore	ClassMember	Signifies that property stream line given for parsing started with '//' (two forward slashes).
ARCCore.PropertyStreamLineParsed.Keys	ARCCore	ClassMember	The keys part of the -PropertyStreamLine-, that is, everything before ' = '.
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp	ARCCore	ClassMember	Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.
ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing	ARCCore	ClassMember	Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client).
ARCCore.StorageFile	ARCCore	Class	Implemented only in order to store some ideas about -Hash-.
ARCCore.StorageFile.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.StorageFile.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Subscription	ARCCore	Class	A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner.
ARCCore.Subscription.FromTime	ARCCore	ClassMember	TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?).
ARCCore.Subscription.ToTime	ARCCore	ClassMember	TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?).
ARCCore.Subscription.IsMatch Overload1	ARCCore	ClassMember	Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line.
ARCCore.Subscription.IsMatch Overload2	ARCCore	ClassMember	Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements).
ARCCore.Subscription.SyntaxHelp	ARCCore	ClassMember	'+*' Subscribe to everything in database.
ARCCore.Subscription.IsAdd	ARCCore	ClassMember	Corresponds to whether value starts with a plus sign, '+' or not.
ARCCore.Subscription.IsRemove	ARCCore	ClassMember	Corresponds to whether value starts with a minus sign, '+' or not.
ARCCore.UtilCore	ARCCore	Class	Utility methods for -ARCCore-.
ARCCore.UtilCore.TimeSpanTryParse	ARCCore	ClassMember	Accepts on of the formats specified in -ValidDateTimeFormats-.
ARCCore.UtilCore.UseLocalTimeInsteadOfUTC	ARCCore	ClassMember	By default AgoRapide operates only with UTC time.
ARCCore.UtilCore.DateTimeNow	ARCCore	ClassMember	Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned.
ARCCore.UtilCore.CurrentlyStartingUp	ARCCore	ClassMember	Called once at application startup after all Attribute instances in the C# code has been processed.
ARCCore.UtilCore.Assemblies	ARCCore	ClassMember	All relevant assemblies for application.
ARCCore.UtilCore.Culture	ARCCore	ClassMember	The general culture used for parsing.
ARCCore.UtilCore.Culture_en_US	ARCCore	ClassMember	Used by -DoubleTryParse-.
ARCCore.UtilCore.DefaultAgoRapideEncoding	ARCCore	ClassMember	The standard encoding used for text (UTF8).
ARCCore.UtilCore.ValidDateTimeFormats	ARCCore	ClassMember	'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd'
ARCCore.UtilCore.ValidTimeSpanFormats	ARCCore	ClassMember	'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff'
ARCCore.REx	ARCCore	Class	REx = 'TooDeepRecursiveDepthException'
ARCCore.REx.Inc	ARCCore	ClassMember	Increases recursive count.
ARCCore.REx.Dec	ARCCore	ClassMember	This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-.
ARCCore.InvalidTypeException	ARCCore	Class
ARCCore.InvalidTypeException.AssertAssignable	ARCCore	ClassMember	Asserts that expectedType.IsAssignableFrom(foundType)
ARCCore.InvalidTypeException.AssertEquals	ARCCore	ClassMember	Asserts that expectedType.Equals(foundType)
ARCCore.ClassAttributeP.ClassType	ARCCore	EnumMember	The actual type that we are a -ClassAttribute- for
ARCCore.ClassAttributeP.BaseTypes	ARCCore	EnumMember	The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object'
ARCCore.ClassAttributeP.SubTypes	ARCCore	EnumMember	Direct and indirect sub types of this class.
ARCCore.ClassAttributeP.Interfaces	ARCCore	EnumMember	All interfaces that this class and its base classes implement
ARCCore.ClassAttributeP.InterfacesDirectlyImplemented	ARCCore	EnumMember	All interfaces that this class directly implements.
ARCCore.ClassAttributeP.CorrespondingEnumType	ARCCore	EnumMember	Only relevant when implements -IP-.
ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage	ARCCore	EnumMember	Only relevant when implements -IP- and when a -CorrespondingEnumType- is found.
ARCCore.ClassMemberAttributeP	ARCCore	Enum	Describes class -ClassMemberAttribute-.
ARCCore.ARComponents.ARCDoc	ARCCore	EnumMember	A library supporting documentation and demonstrating usage of AgoRapide.
ARCCore.ARComponents.ARCQuery	ARCCore	EnumMember	ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs.
ARCCore.ARComponents.ARCSync	ARCCore	EnumMember	(Not implemented as of March 2020)
ARCCore.ARComponents.ARCSec	ARCCore	EnumMember	(Not implemented as of March 2020)
ARCCore.ARComponents.ARCAPI	ARCCore	EnumMember	A library providing an API on top of the -PropertyStream-.
ARCCore.ARComponents.ARAAPI	ARCCore	EnumMember	The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc.
ARCCore.ARConcepts	ARCCore	Enum	The overarching concepts upon which AgoRapide is built.
ARCCore.ARConcepts.GettingStarted	ARCCore	EnumMember	AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET Standard 2.1.
ARCCore.ARConcepts.MemoryConsumption	ARCCore	EnumMember	A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption.
ARCCore.ARConcepts.Indexing	ARCCore	EnumMember	In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-.
ARCCore.ARConcepts.CoreDBSynchronization	ARCCore	EnumMember	The concept of how multiple -CoreDB- instances synchronizes their data.
ARCCore.ARConcepts.SingleThreadedCode	ARCCore	EnumMember	Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-).
ARCCore.ARConcepts.DataRetention	ARCCore	EnumMember	The concept of when to delete old data (if deemed necessary).
ARCCore.ARConcepts.NoRealDeletion	ARCCore	EnumMember	AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data).
ARCCore.ARConcepts.ManyToManyRelations	ARCCore	EnumMember	-ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table).
ARCCore.ARConcepts.Documentation	ARCCore	EnumMember	Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible.
ARCCore.PKLogAttributeP.DoNotLogAtAll	ARCCore	EnumMember	Originates from -DoNotLogAtAll-.
ARCCore.PKLogAttributeP.CountInterval	ARCCore	EnumMember	For a value of n, log only every n'th time the property is changed.
ARCCore.PKLogAttributeP.TimeInterval	ARCCore	EnumMember	Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-.
ARCCore.PKRelAttributeP	ARCCore	Enum	Describes class -PKRelAttribute-.
ARCCore.PKRelAttributeP.ForeignEntity	ARCCore	EnumMember	The type of foreign entity that this property points to.
ARCCore.PKRelAttributeP.EnforceReferentialIntegrity	ARCCore	EnumMember	If TRUE then referential integrity will be enforced by -TryStore-.
ARCCore.PKTypeAttributeP	ARCCore	Enum	Describes class -PKTypeAttribute-.
ARCCore.PKTypeAttributeP.Type	ARCCore	EnumMember	The type of this Property.
ARCCore.ActualConnectionP.Id	ARCCore	EnumMember	When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection.
ARCCore.ActualConnectionP.ConnectionInstruction	ARCCore	EnumMember	Only relevant when we are an -Outgoing-.
ARCCore.ActualConnectionP.ConnectionDirection	ARCCore	EnumMember
ARCCore.ActualConnectionP.CountReceiveMessage	ARCCore	EnumMember
ARCCore.ActualConnectionP.CountSendMessage	ARCCore	EnumMember
ARCCore.ActualConnectionP.ClientUpdatePosition	ARCCore	EnumMember	Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side).
ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient	ARCCore	EnumMember	Originates from -Subscription-.
ARCCore.ActualConnectionP.ClosingReason	ARCCore	EnumMember	Reason why this connection was closed
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.Decode	ARCCore	ClassMember	Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.PropertyStreamLine.TryParseDirectToIP	ARCCore	ClassMember	Parses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.PropertyStreamLine.TryParseDirectToProperty	ARCCore	ClassMember	Parses direct to a given property value.
ARCCore.StreamProcessor+StorageFile.Length	ARCCore	ClassMember	Wrongly placed. Belongs to each individual revision file.
ARCCore.StreamProcessor+StorageFile.Properties	ARCCore	ClassMember	Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on.
ARCCore.BaseAttributeP	ARCCore	Enum	Describes class -BaseAttribute-.
ARCCore.BaseAttributeP.Description	ARCCore	EnumMember	The description for the attribute, like this description
ARCCore.BaseAttributeP.LongDescription	ARCCore	EnumMember	The long (detailed) description for the attribute.
ARCCore.ClassAttributeP	ARCCore	Enum	Describes class -ClassAttribute-.
ARCCore.ClassAttributeP.AssemblyName	ARCCore	EnumMember	The assembly in which this class resides.
ARCCore.ClassAttributeP.ClassNamespace	ARCCore	EnumMember	The namespace for -ClassType-.
ARCCore.EnumAttributeP.CorrespondingClass	ARCCore	EnumMember	Only relevant when -PropertyKeyEnum-.
ARCCore.EnumMemberAttributeP	ARCCore	Enum	Describes class -EnumMemberAttribute-.
ARCCore.EnumMemberAttributeP.EnumType	ARCCore	EnumMember	The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for
ARCCore.EnumMemberAttributeP.EnumMember	ARCCore	EnumMember	The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for
ARCCore.ARComponents	ARCCore	Enum	Contains short descriptions of the different 'official' AgoRapide components.
ARCCore.ARComponents.ARCCore	ARCCore	EnumMember	A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to.
ARCCore.ARComponents.ARADB	ARCCore	EnumMember	An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-).
ARCCore.ARComponents.ARAClient	ARCCore	EnumMember	A template application for a -Client- (linking to -ARCCore-).
ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages	ARCCore	EnumMember	The abstraction level in AgoRapide is very high.
ARCCore.ARConcepts.ExposingApplicationState	ARCCore	EnumMember	The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool.
ARCCore.ARConcepts.LinkInsertionInDocumentation	ARCCore	EnumMember	Documentation with links is much easier to read.
ARCCore.ARConcepts.TryPatternAndNull	ARCCore	EnumMember	AgoRapide uses non-nullable reference types as default throughout the system
ARCCore.AREnumType	ARCCore	Enum	Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-.
ARCCore.AREnumType.PropertyKeyEnum
ARCCore.AREnumType.OrdinaryEnum	ARCCore	EnumMember	Designates "Ordinary" enums used for indicating range of valid values for a given key
ARCCore.AREnumType.DocumentationOnlyEnum	ARCCore	EnumMember	Designates enums that provide a central repository of explanation of terms that are not present in the C# code.
ARCCore.PSPrefix	ARCCore	Enum	Describes some recommended prefixed to use in a -PropertyStreamLine-.
ARCCore.PSPrefix.dt	ARCCore	EnumMember	Data, like dt/
ARCCore.PSPrefix.cmd	ARCCore	EnumMember	Command, like cmd/
ARCCore.PSPrefix.app	ARCCore	EnumMember	Application state, like app/
ARCCore.PSPrefix.doc	ARCCore	EnumMember	Documentation, like doc/.
ARCCore.PKHTMLAttributeP	ARCCore	Enum	Describes class -PKRelAttribute-.
ARCCore.PKHTMLAttributeP.Encoder	ARCCore	EnumMember	The class doing the HTML-encoding.
ARCCore.PKLogAttributeP	ARCCore	Enum	Describes class -PKLogAttribute.
ARCCore.PKTypeAttributeP.DefaultValue	ARCCore	EnumMember	The default value.
ARCCore.PKTypeAttributeP.Cardinality	ARCCore	EnumMember	Describes how multiple instances of a property is supposed to be handled.
ARCCore.PKTypeAttributeP.IsObligatory	ARCCore	EnumMember	True means value is obligatory.
ARCCore.PKTypeAttributeP.BoilerplateCodeProperties	ARCCore	EnumMember	Automatically generated boilerplate code that implements traditional setters and getters for this key.
ARCCore.PP	ARCCore	Enum	Describes meta data for any class (property) implementing -IP-.
ARCCore.PP.Created	ARCCore	EnumMember	Timestamp when property was created in database.
ARCCore.PP.Cid	ARCCore	EnumMember	Creator id (entity which created this property).
ARCCore.PP.Value	ARCCore	EnumMember	The actual value.
ARCCore.ConnectionInstructionP.ServerPortNo	ARCCore	EnumMember	The port number for which to connect.
ARCCore.ConnectionInstructionP.ConnectionId	ARCCore	EnumMember	Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-.
ARCCore.ConnectionInstructionP.DataTransferDirection	ARCCore	EnumMember
ARCCore.ConnectionInstructionP.Subscription	ARCCore	EnumMember	The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server.
ARCCore.ConnectionInstructionP.MultipleConnectionUsage	ARCCore	EnumMember
ARCCore.ConnectionInstructionP.Sharding	ARCCore	EnumMember
ARCCore.MultipleConnectionUsage	ARCCore	Enum	Enables fault-tolerance by describing use of multiple connections
ARCCore.MultipleConnectionUsage.Admin	ARCCore	EnumMember	Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make.
ARCCore.StreamProcessorP.IncomingConnectionsPortNo	ARCCore	EnumMember	If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-).
ARCCore.StreamProcessorP.UnderClosure	ARCCore	EnumMember	Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope
ARCCore.StreamProcessorP.WriteToConsole	ARCCore	EnumMember	If true then incoming data (from other nodes will be written to console.
ARCCore.StreamProcessorP.Timestamp	ARCCore	EnumMember	The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-.
ARCCore.StreamProcessorP.TimestampIsOld	ARCCore	EnumMember	A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date.
ARCCore.StreamProcessorP.TimestampResolution	ARCCore	EnumMember	The time interval between each timestamp update in the -PropertyStream-.
ARCCore.StreamProcessorP.DoNotStoreLocally	ARCCore	EnumMember	For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-.
ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally	ARCCore	EnumMember	Means 'do not store local origin locally but wait until it gets confirmed by core storage'.
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.

Generated 2026-11-05 02:29:43.696 UTC