[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 34 > < TAKE 120 >

120 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.EnumMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.EnumMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.CardinalityExtensions	ARCCore	Class
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.ToStringShort	ARCCore	ClassMember	Returns a shorter representation than -ToStringDB-.
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.IGetKeysEqualToValue	ARCCore	Class	Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCCore.PConcurrent	ARCCore	Class	A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.PConcurrent.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IKIP	ARCCore	Class	Container class for key (-IK-), and value (-IP-).
ARCCore.Extensions.ToStringDateAndTime	ARCCore	ClassMember	Uses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKIP.AssertTypeIntegrity	ARCCore	ClassMember	See -TryAssertTypeIntegrity- for documentation.
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.IKIP.TryAssertTypeIntegrity	ARCCore	ClassMember	Asserts that value is of correct type as specified by the key.
ARCCore.PValueEmpty.ToPropertyStream	ARCCore	ClassMember	Typicall return value could be something like
ARCCore.IKCoded.FromCacheEncoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.ActualConnection	ARCCore	Class	The actual connection, its internal state, queue for sending and so on.
ARCCore.IKCoded.FromCacheUnencoded	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.ActualConnection.SetMyUpdatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.IKCoded.AllowedEncodedCharacters	ARCCore	ClassMember	The character set 'A...Za...z0...9-_().,='.
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiver	ARCCore	ClassMember	Set by -StreamProcessor-.
ARCCore.IKLong	ARCCore	Class	A more memory efficient alternative to -IKString-.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.ActualConnection.SetUpToDatePositionGenerator	ARCCore	ClassMember	Set by -StreamProcessor-. Not used by -Client-.
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.ActualConnection.InitializeOutgoingConnection	ARCCore	ClassMember	Relevant for -Outgoing-.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.ActualConnection.Communicate	ARCCore	ClassMember	Common for both -Incoming- and -Outgoing-.
ARCCore.IKType.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.ActualConnection.LogAndSendErrorConditionData	ARCCore	ClassMember	Called when a serious error condition has been discovered and connection should be terminated.
ARCCore.ITypeDescriber	ARCCore	Class	Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.IKString.FromString	ARCCore	ClassMember	Note how uses instance cache if already exists there
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.ITypeDescriber.GetSyntaxHelp	ARCCore	ClassMember	Enables explanation of syntax in different contexts from one source:
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ParseResult	ARCCore	Class	NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.IKType	ARCCore	Class	Index key used when storing a collection of a given type, like 'Customer'.
ARCCore.ClientUpdatePosition.IsAtEndOfStream	ARCCore	ClassMember	Necessary in order to implement -AdHocQuery-.
ARCCore.PK.GetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.ParseResult.Result	ARCCore	ClassMember	Will be null if ErrorResponse is set.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance	ARCCore	ClassMember	See also -ClientDatastoreIsEmpty.
ARCCore.PK.TryGetA	ARCCore	ClassMember	Convenience method for easy access to -BasePKAttribute-.
ARCCore.ParseResult.ErrorResponse	ARCCore	ClassMember	Will be null if Result is set
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance	ARCCore	ClassMember	See also -OnlyNewDataIsRequested.
ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality	ARCCore	ClassMember	Called from -Initialize- after _cleaner and _validatorAndParser have been set.
ARCCore.PK	ARCCore	Class	PK = AgoRapide PropertyKey.
ARCCore.ConnectionInstruction	ARCCore	Class	The instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.PK.ToString	ARCCore	ClassMember	Caching is supposed to be useful because may be called quite often.
ARCCore.PK.TryGetEnum	ARCCore	ClassMember	Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.ConnectionInstruction.Initialize	ARCCore	ClassMember	Initializes to sane values.
ARCCore.PK.FromEnum	ARCCore	ClassMember	Returns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.TryValidateAndParse	ARCCore	ClassMember	Parses the value according to specifications for this property key.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK.TryGetFromTypeAndFieldName Overload3	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.TryCleanValidateAndParse	ARCCore	ClassMember	Cleans and parses the value according to specifications for this property key.
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.PackParseResultForStorageInEntityObject	ARCCore	ClassMember	Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1	ARCCore	ClassMember	Returns property key based on type and field name.
ARCCore.PK.PackObjectForStorageInEntityObject	ARCCore	ClassMember	See -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PropertyStreamLine.ParseAndStore	ARCCore	ClassMember	Note that throws exception if -TryParseAndStore- fails.
ARCCore.PK.GetObligatoryValuesForEntityType	ARCCore	ClassMember	Returns all obligatory values (based on -IsObligatory-)
ARCCore.PK.GetAllPKForEntityType	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PropertyStreamLine.ParseAndStoreFailSafe	ARCCore	ClassMember	If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.PK.Equals	ARCCore	ClassMember	Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.GetAllPKForEntityTypeString	ARCCore	ClassMember	Returns all property keys relevant for the given entity type,
ARCCore.PropertyStreamLine.StoreFailSafe	ARCCore	ClassMember	Stores if possible and fails silently.
ARCCore.PK.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PK.BuildFromStringCache	ARCCore	ClassMember	Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PropertyStreamLine.StoreFailure	ARCCore	ClassMember	Stores a 'ParseOrStoreFailure'-object.
ARCCore.PK..ctor	ARCCore	ClassMember	Constructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.GetTypeMapping	ARCCore	ClassMember	Returns the relevant property key for a given type entity-type and field-type.
ARCCore.PropertyStreamLine.TryStore	ARCCore	ClassMember	Stores the given -PropertyStreamLineParsed- in the given storage object.
ARCCore.PK.Cleaner	ARCCore	ClassMember	Cleanup of values, to be used before value is attempted validated.
ARCCore.PK.Type	ARCCore	ClassMember	Returns type from -PKTypeAttribute-'s -Type-.
ARCCore.PropertyStreamLine.AllowedKeyChars	ARCCore	ClassMember	Allowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.PK.AllEnums	ARCCore	ClassMember	All enums for the whole application.
ARCCore.PK.Cardinality	ARCCore	ClassMember	Returns cardinality from -PKTypeAttribute-'s -Cardinality-.
ARCCore.PropertyStreamLine.AllowedValueChars	ARCCore	ClassMember	Allowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.PK.AllPKEnums	ARCCore	ClassMember	All -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.CorrespondingClass	ARCCore	ClassMember	Returns -CorrespondingClass- based on -__enum-.
ARCCore.PropertyStreamLineParsed	ARCCore	Class	Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.PK.__enum	ARCCore	ClassMember	This information is also found as EnumMember.
ARCCore.PK.ValidatorAndParser	ARCCore	ClassMember	Validates and parses a value.
ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin	ARCCore	ClassMember	Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if
ARCCore.PKHTMLAttribute.Encoder	ARCCore	ClassMember	See -Encoder-.
ARCCore.PKHTMLAttribute	ARCCore	Class	Contains pointer to HTML encoder for a property.
ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver	ARCCore	ClassMember	Means 'send to local receiver regardless of origin'.
ARCCore.PKHTMLAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)

Generated 2025-11-05 22:31:46.813 UTC