[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 19 > < TAKE 992 >
992 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.EnumAttribute | ARCCore | Class | Describes an enum. |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCCore.EnumMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCCore.Extensions.ToStringShort | ARCCore | ClassMember | Returns a shorter representation than -ToStringDB-. |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.Extensions.Use | ARCCore | ClassMember | Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times |
| ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.Extensions.ForEach | ARCCore | ClassMember | Useful when we want to write collection.ForEach( ... ) instead of |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
| ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
| ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
| ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.IKType | |||
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.PValue<T>..ctor | ARCCore | ClassMember | Note how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide) |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.ActualConnection..ctor | ARCCore | ClassMember | Note parameter-less constructor as desired for all classes inheriting -IP-. |
| ARCCore.IP.TryGetP Overload1 | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.MonkeyWrench | ARCCore | Class | Describes level of 'spanner-throwing' this connection shall contibute with |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Makes the following modifications to the data: |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.IP.AddPV | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.BaseAttribute | ARCCore | Class | Instances of this class are used as source of documentation and data for the API. |
| ARCCore.PropertyStreamLine.EncodeValuePart | ARCCore | ClassMember | Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.BaseAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.BasePKAttribute.GetAttributes | ARCCore | ClassMember | Note that illegal to call for other than -PropertyKeyEnum-. |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.BasePKAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.ClassAttribute | ARCCore | Class | Describes a class. |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.ClassAttribute.GetAttribute | ARCCore | ClassMember | Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance) |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.PropertyStreamLine.StoreFailSafe | ARCCore | ClassMember | Stores if possible and fails silently. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PropertyStreamLine.StoreFailure | ARCCore | ClassMember | Stores a 'ParseOrStoreFailure'-object. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PropertyStreamLineParsed.Value | ARCCore | ClassMember | The original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '. |
| ARCCore.IP.TryGetP Overload2 | ARCCore | ClassMember | Note that not relevant for single-value properties like -PValue-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.StreamProcessor | ARCCore | Class | Implements the storage mechanism for AgoRapide. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.StreamProcessor.CreateBareBonesInstance | ARCCore | ClassMember | Creates a bare-bones -StreamProcessor- instance. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.StreamProcessor.Initialize | ARCCore | ClassMember | Initializes this instance of -StreamProcessor- |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections | ARCCore | ClassMember | Not relevant for -CoreDB-. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.StreamProcessor.StartTCPIPCommunication | ARCCore | ClassMember | Starts communicating over TCP/IP. |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.StreamProcessor.ReceiveAndDistribute | ARCCore | ClassMember | Process all messages in receive queue. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Offers for lookup of a type given its string representation. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.StreamProcessor.AddTimestampAsRequired | ARCCore | ClassMember | Adds -Timestamp- to the property stream (to -_queueReceive-) as specified by -TimestampResolution-. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.StreamProcessor.ReadStorageFile | ARCCore | ClassMember | Reads one storage file from disk |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.StreamProcessor.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.StreamProcessor.OutsideLocalReceiver | ARCCore | ClassMember | The outside (in the sense outside of this class) local mechanism which receives all -PropertyStreamLine- registered by this class. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PropertyStreamLineWithOrigin | ARCCore | Class | The rationale for this class is that -ReceiveAndDistribute- needs to distingush origin of data when routing it (in general, in order to avoid sending it back to its source). |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PropertyStreamLineWithOrigin.HasLocalOrigin | ARCCore | ClassMember | Locally generated data is not to be sent to -OutsideLocalReceiver-). We instead leave it to the 'outside' to decide if |
| ARCCore.PExact<EnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PropertyStreamLineWithOrigin.SendToLocalReceiver | ARCCore | ClassMember | Means 'send to local receiver regardless of origin'. |
| ARCCore.PExact<EnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp | ARCCore | ClassMember | Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage. |
| ARCCore.PExact<EnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PropertyStreamLineWithOrigin.ReceivedFromOutgoing | ARCCore | ClassMember | Data received from an outgoing connection, that is, data received based on 'this' application's subscription request (as subscribing client). |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.UtilCore.Assemblies | ARCCore | ClassMember | All relevant assemblies for application. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.UtilCore.Culture | ARCCore | ClassMember | The general culture used for parsing. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.UtilCore.Culture_en_US | ARCCore | ClassMember | Used by -DoubleTryParse-. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.UtilCore.DefaultAgoRapideEncoding | ARCCore | ClassMember | The standard encoding used for text (UTF8). |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.UtilCore.ValidDateTimeFormats | ARCCore | ClassMember | 'yyyy-MM-dd HH:mm:ss.fff', 'yyyy-MM-dd HH:mm:ss', 'yyyy-MM-dd HH:mm', 'yyyy-MM-dd' |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.UtilCore.ValidTimeSpanFormats | ARCCore | ClassMember | 'hh\:mm', 'hh\:mm\:ss', 'd\.hh\:mm\:ss', 'hh\:mm\:ss\.fff' // Milliseconds,'d\.hh\:mm\:ss\.fff' |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.REx | ARCCore | Class | REx = 'TooDeepRecursiveDepthException' |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.REx.Inc | ARCCore | ClassMember | Increases recursive count. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PK+PKBoolPair.TrulyInitialized | ARCCore | ClassMember | Not used currently (May 2020). Useful for debugging purposes |
| ARCCore.PValueEmpty | ARCCore | Class | Represents the 'no value'. |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.StreamProcessor+StorageFile | ARCCore | Class | |
| ARCCore.PValueEmpty.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.StreamProcessor+StorageFile.Filepath | ARCCore | ClassMember | Complete path to file |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.StreamProcessor+StorageFile.Filename | ARCCore | ClassMember | Filename: Main file name, like 2020-04-03 08:42 |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.StreamProcessor+StorageFile.Length | ARCCore | ClassMember | Wrongly placed. Belongs to each individual revision file. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.StreamProcessor+StorageFile.Properties | ARCCore | ClassMember | Key = revision number of file (due to compression / -DataRetention-), like R00001, R00002 and so on. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.BaseAttributeP | ARCCore | Enum | Describes class -BaseAttribute-. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.BaseAttributeP.Description | ARCCore | EnumMember | The description for the attribute, like this description |
| ARCCore.ActualConnection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.ClassAttributeP.InterfacesDirectlyImplemented | ARCCore | EnumMember | All interfaces that this class directly implements. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.ClassAttributeP.CorrespondingEnumType | ARCCore | EnumMember | Only relevant when implements -IP-. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.ClassAttributeP.BoilerplateCodePropertiesAndStorage | ARCCore | EnumMember | Only relevant when implements -IP- and when a -CorrespondingEnumType- is found. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.ClassMemberAttributeP | ARCCore | Enum | Describes class -ClassMemberAttribute-. |
| ARCCore.ConnectionInstruction | ARCCore | Class | The instruction about what connections to make (host, portnr, data transfer direction and so on). |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.ClassMemberAttributeP.DeclaringType | ARCCore | EnumMember | The actual MemberInfo.DeclaringType. |
| ARCCore.ARComponents | ARCCore | Enum | Contains short descriptions of the different 'official' AgoRapide components. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.ClassMemberAttributeP.MethodName | ARCCore | EnumMember | The actual MemberInfo.Name. |
| ARCCore.ARComponents.ARCCore | ARCCore | EnumMember | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.ClassMemberAttributeP.MethodSignature | ARCCore | EnumMember | The actual MemberInfo.ToString. |
| ARCCore.ARComponents.ARADB | ARCCore | EnumMember | An application constituting the full functionality of a -CoreDB- (linking to -ARCCore-). |
| ARCCore.IP.GetP | ARCCore | ClassMember | Gets a single property for this object. |
| ARCCore.EnumAttributeP | ARCCore | Enum | Describes class -EnumAttribute-. |
| ARCCore.ARComponents.ARAClient | ARCCore | EnumMember | A template application for a -Client- (linking to -ARCCore-). |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.ARComponents.ARCDoc | ARCCore | EnumMember | A library supporting documentation and demonstrating usage of AgoRapide. |
| ARCCore.ARConcepts.PropertyStream | ARCCore | EnumMember | AgoRapide, the 'streams-of-water' database". |
| ARCCore.IP.EnumeratorReturnsEmptyCollection | ARCCore | ClassMember | Hint for how to avoid calling enumerator.Count() when all you need is to decide if collection is empty or not. |
| ARCCore.ARComponents.ARCQuery | ARCCore | EnumMember | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. |
| ARCCore.ARConcepts.TaggingOfPropertyKeys | ARCCore | EnumMember | The concept of specifying in a single place all relevant information about a given property (data field). |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.ARComponents.ARCSync | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ARConcepts.PropertyAccess | ARCCore | EnumMember | The general mechanism for accessing properties of objects in AgoRapide. |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.ARComponents.ARCSec | ARCCore | EnumMember | (Not implemented as of March 2020) |
| ARCCore.ARConcepts.AvoidingRepetition | ARCCore | EnumMember | Avoiding repetition, the overarching philosophy that inspired the rest of AgoRapide. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.ARComponents.ARCAPI | ARCCore | EnumMember | A library providing an API on top of the -PropertyStream-. |
| ARCCore.AREnumType | ARCCore | Enum | Categories different types of enum used in AgoRapide. The most important one is -PropertyKeyEnum-. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.ARComponents.ARAAPI | ARCCore | EnumMember | The corresponding template application for -ARCAPI- demonstrating its usage, providing an HTTP / HTTPS interface with the help of Microsoft.AspNetCore.Mvc. |
| ARCCore.AREnumType.PropertyKeyEnum | |||
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.ARConcepts | ARCCore | Enum | The overarching concepts upon which AgoRapide is built. |
| ARCCore.AREnumType.OrdinaryEnum | ARCCore | EnumMember | Designates "Ordinary" enums used for indicating range of valid values for a given key |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.ARConcepts.GettingStarted | ARCCore | EnumMember | AgoRapide 2020 is an open source library for building data-oriented backend applications using .NET Standard 2.1. |
| ARCCore.AREnumType.DocumentationOnlyEnum | ARCCore | EnumMember | Designates enums that provide a central repository of explanation of terms that are not present in the C# code. |
| ARCCore.Subscription.SyntaxHelp | ARCCore | ClassMember | '+*' Subscribe to everything in database. |
| ARCCore.ARConcepts.AgoRapideHistory | ARCCore | EnumMember | AgoRapide has roots back to 2011 when Bjørn Erling Fløtten invented panSL (SL = Schema language). |
| ARCCore.ARNodeType | ARCCore | Enum | Describes what function a node in an AgoRapide system serves. A given node may constitute of only -StandardAgoRapideCode- or a combination of -StandardAgoRapideCode- and -ApplicationSpecificCode-. |
| ARCCore.Subscription.IsAdd | ARCCore | ClassMember | Corresponds to whether value starts with a plus sign, '+' or not. |
| ARCCore.ARConcepts.AdHocQuery | ARCCore | EnumMember | The concept of a -Client- doing an ad-hoc query against (normally) a -ArmDB-. |
| ARCCore.ARNodeType.CoreDB | ARCCore | EnumMember | A node containing the core or central database. |
| ARCCore.Subscription.IsRemove | ARCCore | ClassMember | Corresponds to whether value starts with a minus sign, '+' or not. |
| ARCCore.ARConcepts.StandardAgoRapideCode | ARCCore | EnumMember | Code originating from the main official AgoRapide distribution (which therefore does not include any end-application specific code) |
| ARCCore.ARNodeType.ArmDB | ARCCore | EnumMember | A node with a 'client -Subscription-' towards -CoreDB- to a (usually) subset of the entire database (acting as a cache and filtering mechanism), or with a 'client -Subscription-' towards -CoreDB- to the whole database (acting as a cache mechanism only) |
| ARCCore.UtilCore | ARCCore | Class | Utility methods for -ARCCore-. |
| ARCCore.ARConcepts.ApplicationSpecificCode | ARCCore | EnumMember | Code specific for an end-application. |
| ARCCore.ARNodeType.Client | ARCCore | EnumMember | An outer node / 'end' node with (usually) -ApplicationSpecificCode- but based on -ARADB-. |
| ARCCore.UtilCore.AssertCurrentlyStartingUp | ARCCore | ClassMember | Normally called from non-thread safe methods that should be run single-threaded at application startup only. |
| ARCCore.ARConcepts.MemoryConsumption | ARCCore | EnumMember | A naïve implementation of key-value storages like AgoRapide may lead to excessive memory (RAM) consumption. |
| ARCCore.Cardinality | ARCCore | Enum | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.UtilCore.DoubleTryParse | ARCCore | ClassMember | Note that treats ',' (comma) as decimal point (not as thousands separator). |
| ARCCore.ARConcepts.Indexing | ARCCore | EnumMember | In-memory indexing of data is done 'behind-the-scenes' by some classes implementing -IP-. |
| ARCCore.Cardinality.HistoryOnly | ARCCore | EnumMember | The default value. |
| ARCCore.UtilCore.EnumTryParse | ARCCore | ClassMember | Same as the inbuilt .NET method -TryParse- but with some additional checks. |
| ARCCore.ARConcepts.CoreDBSynchronization | ARCCore | EnumMember | The concept of how multiple -CoreDB- instances synchronizes their data. |
| ARCCore.Cardinality.WholeCollection | ARCCore | EnumMember | Values are always set as a whole (there is no need or no meaning in setting or deleting individual items) |
| ARCCore.UtilCore.TryGetTypeFromStringNoCache | ARCCore | ClassMember | See -TryGetTypeFromStringFromCache- for documentation. |
| ARCCore.ARConcepts.SingleThreadedCode | ARCCore | EnumMember | Some practical choices have been made in AgoRapide which requires object access to be done in a single-threaded manner, or within a locking context (using for instance -ReaderWriterLockSlim-). |
| ARCCore.Cardinality.IndividualItems | ARCCore | EnumMember | Values are supposed to be set and 'deleted' individually. |
| ARCCore.ARConcepts.DataRetention | ARCCore | EnumMember | The concept of when to delete old data (if deemed necessary). |
| ARCCore.PKTypeAttributeP.DefaultValue | ARCCore | EnumMember | The default value. |
| ARCCore.ARConcepts.NoRealDeletion | ARCCore | EnumMember | AgoRapide has no real concept for deletion of data (apart from -DataRetention-, which is mostly relevant for 'old' data). |
| ARCCore.PKTypeAttributeP.Cardinality | ARCCore | EnumMember | Describes how multiple instances of a property is supposed to be handled. |
| ARCCore.ARConcepts.ManyToManyRelations | ARCCore | EnumMember | -ARCQuery- supports many-to-many relations in a simple manner without introducing a third entity type (a third table). |
| ARCCore.PKTypeAttributeP.IsObligatory | ARCCore | EnumMember | True means value is obligatory. |
| ARCCore.ARConcepts.Documentation | ARCCore | EnumMember | Thanks to the tagging of enums and classes in AgoRapide (like this description), automatically generation of documentation is possible. |
| ARCCore.PKTypeAttributeP.BoilerplateCodeProperties | ARCCore | EnumMember | Automatically generated boilerplate code that implements traditional setters and getters for this key. |
| ARCCore.ARConcepts.AssertionsAndDetailedExceptionMessages | ARCCore | EnumMember | The abstraction level in AgoRapide is very high. |
| ARCCore.PP | ARCCore | Enum | Describes meta data for any class (property) implementing -IP-. |
| ARCCore.ARConcepts.ExposingApplicationState | ARCCore | EnumMember | The traditional debugging process usually entails reading through logs and querying about your application state through a debugging tool. |
| ARCCore.PP.Created | ARCCore | EnumMember | Timestamp when property was created in database. |
| ARCCore.ARConcepts.LinkInsertionInDocumentation | ARCCore | EnumMember | Documentation with links is much easier to read. |
| ARCCore.PP.Cid | ARCCore | EnumMember | Creator id (entity which created this property). |
| ARCCore.ARConcepts.TryPatternAndNull | ARCCore | EnumMember | AgoRapide uses non-nullable reference types as default throughout the system |
| ARCCore.PP.Value | ARCCore | EnumMember | The actual value. |
| ARCCore.PSPrefix | ARCCore | Enum | Describes some recommended prefixed to use in a -PropertyStreamLine-. |
| ARCCore.ActualConnectionP.IsErrorCondition | ARCCore | EnumMember | Some kind of error condition has occured regarding data going back and forth, but the TCP/IP connection itself is probably sound. |
| ARCCore.PSPrefix.dt | ARCCore | EnumMember | Data, like dt/ |
| ARCCore.ActualConnectionP.ErrorConditionData | ARCCore | EnumMember | Detailed explanation about -IsErrorCondition- |
| ARCCore.PSPrefix.cmd | ARCCore | EnumMember | Command, like cmd/ |
| ARCCore.ActualConnectionP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed and reinitialized. |
| ARCCore.PSPrefix.app | ARCCore | EnumMember | Application state, like app/ |
| ARCCore.ActualConnectionP.MonkeyWrench | ARCCore | EnumMember | |
| ARCCore.PSPrefix.doc | ARCCore | EnumMember | Documentation, like doc/. |
| ARCCore.ActualConnectionP.PartnerIPAddress | ARCCore | EnumMember | TODO: Use more strongly typing for this. |
| ARCCore.PKHTMLAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.ConnectionInstructionP | ARCCore | Enum | Describes class -ConnectionInstruction-. |
| ARCCore.PKHTMLAttributeP.Encoder | ARCCore | EnumMember | The class doing the HTML-encoding. |
| ARCCore.ConnectionInstructionP.ClientId | ARCCore | EnumMember | The AgoRapide node-id for which this connection is relevant. Used for distributing over the -PropertyStream- information to the clients about which possible nodes they can connect to. |
| ARCCore.PKLogAttributeP | ARCCore | Enum | Describes class -PKLogAttribute. |
| ARCCore.ConnectionInstructionP.ServerHostName | ARCCore | EnumMember | The host (DNS or IP-address) for which to connect. |
| ARCCore.PKLogAttributeP.DoNotLogAtAll | ARCCore | EnumMember | Originates from -DoNotLogAtAll-. |
| ARCCore.MultipleConnectionUsage.RoundRobin | ARCCore | EnumMember | This connection to be used in a turn based system, together with other connections with -RoundRobin-. |
| ARCCore.PKLogAttributeP.CountInterval | ARCCore | EnumMember | For a value of n, log only every n'th time the property is changed. |
| ARCCore.MultipleConnectionUsage.Simultaneous | ARCCore | EnumMember | This connection to be used simultaneously with other connections with -Simultaneous- |
| ARCCore.PKLogAttributeP.TimeInterval | ARCCore | EnumMember | Specifies a certain time interval for which the property's value shall be sent over the -PropertyStream-. |
| ARCCore.StreamProcessorP | ARCCore | Enum | Describes class -StreamProcessor-. |
| ARCCore.PKRelAttributeP | ARCCore | Enum | Describes class -PKRelAttribute-. |
| ARCCore.StreamProcessorP.LocalStorageFolder | ARCCore | EnumMember | The local path to which new properties are stored. Should NOT end with any trailing DirectorySeparatorChar |
| ARCCore.PKRelAttributeP.ForeignEntity | ARCCore | EnumMember | The type of foreign entity that this property points to. |
| ARCCore.StreamProcessorP.IndividualStorageFileSize | ARCCore | EnumMember | Max size (in bytes) for a single storage file before a new file is created by call to -StreamProcessor.CreateNewStorageFile-. |
| ARCCore.PKRelAttributeP.EnforceReferentialIntegrity | ARCCore | EnumMember | If TRUE then referential integrity will be enforced by -TryStore-. |
| ARCCore.StreamProcessorP.CurrentlyInitializing | ARCCore | EnumMember | Set to TRUE at initialization (signals for instance -ReceiveAndDistribute- that it can only queue messages, not process them). |
| ARCCore.PKTypeAttributeP | ARCCore | Enum | Describes class -PKTypeAttribute-. |
| ARCCore.StreamProcessorP.ClientUpdatePositionPath | ARCCore | EnumMember | Complete path to file containing -ClientUpdatePosition-. |
| ARCCore.PKTypeAttributeP.Type | ARCCore | EnumMember | The type of this Property. |
| ARCCore.StreamProcessorP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCDoc.Orange.Storage | ARCDoc | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.StreamProcessorP.CacheDiskWrites | ARCCore | EnumMember | If TRUE then will write the -PropertyStream- to disk in bigger chunks, thereby increasing performance. |
| ARCDoc.SomeAppComponent | ARCDoc | Class | Demonstrates how also your actual application classes, not only your data classes, should implement -IP-. |
| ARCCore.StreamProcessorP.CopyFileStructureFromCore | ARCCore | EnumMember | If TRUE, will copy the exact file structure (through information given in -ClientUpdatePosition-). |
| ARCDoc.SomeAppComponent.MethodC | ARCDoc | ClassMember | Note structured format in logging. |
| ARCCore.StreamProcessorP.CountIncomingConnections | ARCCore | EnumMember | |
| ARCDoc.SomeAppComponent.MethodD | ARCDoc | ClassMember | Same as MethodC- but returns data ('Func<string>()' instead of 'Action()') |
| ARCCore.StreamProcessorP.CountOutgoingConnections | |||
| ARCDoc.SomeAppComponent.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.StreamProcessorP.CountOutsideLocalReceiver | ARCCore | EnumMember | Count of calls to -OutsideLocalReceiver-. |
| ARCDoc.DocFrag | ARCDoc | Class | DocFrag = Document fragment. |
| ARCCore.StreamProcessorP.CountReceiveLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- with -HasLocalOrigin-. |
| ARCDoc.DocFrag.Create Overload1 | ARCDoc | ClassMember | Creates a -DocFrag- object representing an assembly or a namespace. |
| ARCCore.StreamProcessorP.CountReceiveNonLocalOrigin | ARCCore | EnumMember | Count of -PropertyStreamLine- not with -HasLocalOrigin-. |
| ARCDoc.DocFrag.Create Overload2 | ARCDoc | ClassMember | Creates a -DocFrag- object representing a class, class member, enum or enum member. |
| ARCCore.StorageFileP | ARCCore | Enum | Describes class -StorageFile-. |
| ARCDoc.DocFrag.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.TPropertyKeyEnum | ARCCore | Enum | Placeholder for any enum type suitable as generic type parameter for -PExact-. |
| ARCDoc.DocFrag.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| Assembly ARCDoc | Assembly | A library supporting documentation and demonstrating usage of AgoRapide. | |
| ARCDoc.DocFrag.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Apple | ARCDoc | Class | The most 'standard' way of implementing an entity-class in AgoRapide, by just inheriting -PRich-. |
| ARCDoc.DocFragCollection | ARCDoc | Class | Contains a collection of -DocFrag- objects. |
| ARCDoc.Apple.AddName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.DocFragCollection.Create | ARCDoc | ClassMember | Creates documentation fragments (-DocFrag-) for all possible -BaseAttribute- elements found in the given assemblies. |
| ARCDoc.Apple.GetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.DocFragCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Apple.TryGetName | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCDoc.DocFragCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Apple.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocLink | ARCDoc | Class | Describes to where a single HTML link points. |
| ARCDoc.Apple.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.UtilDoc | ARCDoc | Class | Utility methods for -ARCDoc-. |
| ARCDoc.Demonstrator.DemonstrateITypeDescriber | ARCDoc | ClassMember | Demonstrates use of -ITypeDescriber- for describing single-property values. |
| ARCDoc.UtilDoc.GetCurrentLevelInHierarchyAsHTML | ARCDoc | ClassMember | Returns an HTML presentation of the given link context, with links pointing backwards to each level in the hierarchy. |
| ARCDoc.Demonstrator.DemonstratePRichHierarchicalStorage | ARCDoc | ClassMember | Demonstrates use of -PRich-, how it receives -PropertyStream--lines and builds up a strongly typed hierarchical object storage. |
| ARCDoc.UtilDoc.GenerateHTMLPage | ARCDoc | ClassMember | Wraps the parameter inside a <html><head></head><body>...</body></html> enclosure with some rudimentare CSS. |
| ARCDoc.Demonstrator.DemonstratePropertyStream | ARCDoc | ClassMember | Demonstrates use of -PropertyStream- by generating local data (documentation data) and writing locally to console. |
| ARCDoc.HTOC+ParentChain | ARCDoc | Class | Used by -FilterNode- in order to keep track of node's parents. |
| ARCDoc.Demonstrator.DemonstrateBareBonesClient | ARCDoc | ClassMember | Demonstrates adding -PropertyStream--lines to -CoreDB- without using ANY AgoRapide component, only standard TCP/IP functionality in .NET. |
| ARCDoc.AppleP | ARCDoc | Enum | Describes class -Apple-. |
| ARCDoc.Demonstrator.DemonstrateLogConsole | ARCDoc | ClassMember | Demonstrates a quite simple log console. |
| ARCDoc.AppleP.Name | ARCDoc | EnumMember | The name of the apple |
| ARCDoc.Demonstrator.DemonstrateStreamProcessorAsClient | ARCDoc | ClassMember | Demonstrates use of -StreamProcessor- as a general client. |
| ARCDoc.AppleP.Colour | ARCDoc | EnumMember | |
| ARCDoc.Orange | ARCDoc | Class | Inherits -PExact- for probably the best compromise between memory consumption and easy of development. |
| ARCDoc.BananaP | ARCDoc | Enum | Describes class -Banana-. |
| ARCDoc.Orange.Name | ARCDoc | ClassMember | See -Name- for more information. |
| ARCDoc.BananaP.Name | ARCDoc | EnumMember | The name of the banana |
| ARCDoc.DocLink.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.BananaP.Colour | ARCDoc | EnumMember | |
| ARCDoc.DocLink.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.OrangeP | ARCDoc | Enum | Describes class -Orange-. |
| ARCDoc.DocLink.Location | ARCDoc | ClassMember | Copy of -Location-. |
| ARCDoc.OrangeP.Name | ARCDoc | EnumMember | The name of the orange |
| ARCDoc.DocLink.Filename | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.OrangeP.Colour | ARCDoc | EnumMember | |
| ARCDoc.DocLink.LinkWordHTML | ARCDoc | ClassMember | Copy of -LinkWordHTML-. |
| ARCDoc.SomeAppComponentP | ARCDoc | Enum | Describes class -SomeAppComponent-. |
| ARCDoc.DocLink.LinkWordHTMLWithHyphens | ARCDoc | ClassMember | -LinkWordHTML- with '-' (minus sign / hyphen) prepended and appended. |
| ARCDoc.SomeAppComponentP.SomeCountValue | ARCDoc | EnumMember | |
| ARCDoc.DocLink.LinkWordHTMLBeforeLt | ARCDoc | ClassMember | If -LinkWordHTML contains '<' (really '<') (for generic types, like 'PValue<TValue>') then this will contain the part before '<' like 'PValue'. |
| ARCDoc.SomeAppComponentP.SomeCountValueNotToBeLogged | ARCDoc | EnumMember | |
| ARCDoc.DocLink.LinkWordHTMLBeforeLtWithHyphens | ARCDoc | ClassMember | -LinkWordHTMLBeforeLt- with '-' (minus sign / hyphen) prepended and appended. |
| ARCDoc.DocFragP | ARCDoc | Enum | Describes class -DocFrag-. |
| ARCDoc.DocLinkResolution.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP.DocFragType | ARCDoc | EnumMember | |
| ARCDoc.DocLinkResolution.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.Assembly | ARCDoc | EnumMember | Name of the assembly in which this fragment resides. |
| ARCDoc.DocLinkResolutionCollection | ARCDoc | Class | Contains a collection of -DocLinkResolution- objects. |
| ARCDoc.DocFragP.Namespace | ARCDoc | EnumMember | Namespace in which this fragment resides. |
| ARCDoc.DocLinkResolutionCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.DocFragP.ParentNamespace | ARCDoc | EnumMember | Parent namespace of namespace in which this fragment resides. |
| ARCDoc.DocLinkResolutionCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.DocFragP.Type | ARCDoc | EnumMember | Type of class or enum which this fragment describes (also relevant for class or enum member). |
| ARCDoc.Documentator | ARCDoc | Class | General class for documenting AgoRapide and also your own -ApplicationSpecificCode-. |
| ARCDoc.DocFragP.Name | ARCDoc | EnumMember | As simple a name as practical usable. Often not unique within a greater context. |
| ARCDoc.Documentator.CreateAndInsert | ARCDoc | ClassMember | Creates an instance of -Documentator- with a natural hierarchical representation of documentation attributes found in the given assemblies. |
| ARCDoc.DocFragP.IsInherited | ARCDoc | EnumMember | Relevant for class members. TRUE if method is inherited from a base type. |
| ARCDoc.Documentator.ToHTMLSimpleSingle | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCCore.PP.Valid | ARCCore | EnumMember | Timestamp when property was last known to be (still) valid |
| ARCCore.ConnectionInstruction.Initialize | ARCCore | ClassMember | Initializes to sane values. |
| ARCCore.PP.Vid | ARCCore | EnumMember | Validator id, that is entity which set -Valid- for this property. |
| ARCCore.ConnectionInstruction.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PP.Invalid | ARCCore | EnumMember | Timestamp when property was invalidated / 'deleted'. |
| ARCCore.ConnectionInstruction.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PP.Iid | ARCCore | EnumMember | Invalidator id, that is entity which set -Invalid- for this property (or removed / 'undid' the invalidation by setting the value to '0001-01-01'). |
| ARCCore.Sharding | ARCCore | Class | Enables load-balancing by describing what data should be sent over a given connection. |
| ARCCore.PP.ExceptionText | ARCCore | EnumMember | General property for logging of exceptions, usually set through -HandleException-. |
| ARCCore.PropertyStreamLine | ARCCore | Class | Has two main functions: |
| ARCCore.PConcurrentP | ARCCore | Enum | Describes class -PConcurrent-. |
| ARCCore.PropertyStreamLine.EncodeKeys | ARCCore | ClassMember | Encodes the key part of a -PropertyStreamLine-. |
| ARCCore.PConcurrentP.Heartbeat | ARCCore | EnumMember | |
| ARCCore.PropertyStreamLine.EncodeValues | ARCCore | ClassMember | Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-. |
| ARCCore.ActualConnectionP | ARCCore | Enum | Describes class -ActualConnection-. |
| ARCCore.PropertyStreamLine.EncodeKeyPart | ARCCore | ClassMember | Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-. |
| ARCCore.ActualConnectionP.Id | ARCCore | EnumMember | When connection is used with-StreamProcessor-, the Id should be the same as the key used in the incoming / outgoing connection dictionary collection. |
| ARCCore.PropertyStreamLine.TryStore | ARCCore | ClassMember | Stores the given -PropertyStreamLineParsed- in the given storage object. |
| ARCCore.ActualConnectionP.ConnectionInstruction | ARCCore | EnumMember | Only relevant when we are an -Outgoing-. |
| ARCCore.PropertyStreamLine.AllowedKeyChars | ARCCore | ClassMember | Allowed characters in the Key-part of a -PropertyStreamLine-. |
| ARCCore.ActualConnectionP.ConnectionDirection | ARCCore | EnumMember | |
| ARCCore.PropertyStreamLine.AllowedValueChars | ARCCore | ClassMember | Allowed characters in the Value-part of a -PropertyStreamLine-. |
| ARCCore.ActualConnectionP.CountReceiveMessage | ARCCore | EnumMember | |
| ARCCore.PropertyStreamLineParsed | ARCCore | Class | Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John. |
| ARCCore.ActualConnectionP.CountSendMessage | ARCCore | EnumMember | |
| ARCCore.PropertyStreamLineParsed.ToString | ARCCore | ClassMember | Note relatively complex operation of 'restoring' original property stream line. |
| ARCCore.ActualConnectionP.ClientUpdatePosition | ARCCore | EnumMember | Note how this is stored both as -ClientUpdatePosition- (on the client side) and -ClientUpdatePosition- (on the server side). |
| ARCCore.PropertyStreamLineParsed.TryParse | ARCCore | ClassMember | Generate list of <(IK key, Type valueType)> together with value from value part. |
| ARCCore.ActualConnectionP.SubscriptionAsRequestedByClient | ARCCore | EnumMember | Originates from -Subscription-. |
| ARCCore.PropertyStreamLineParsed.IsComment | ARCCore | ClassMember | Signifies that property stream line given for parsing started with '//' (two forward slashes). |
| ARCCore.ActualConnectionP.ClosingReason | ARCCore | EnumMember | Reason why this connection was closed |
| ARCCore.PropertyStreamLineParsed.Keys | ARCCore | ClassMember | The keys part of the -PropertyStreamLine-, that is, everything before ' = '. |
| ARCCore.ConnectionInstructionP.ServerPortNo | ARCCore | EnumMember | The port number for which to connect. |
| ARCCore.StorageFile | ARCCore | Class | Implemented only in order to store some ideas about -Hash-. |
| ARCCore.ConnectionInstructionP.ConnectionId | ARCCore | EnumMember | Usually a combination of -ClientId-, -ServerHostName- and -ServerPortNo-. |
| ARCCore.StorageFile.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.ConnectionInstructionP.DataTransferDirection | ARCCore | EnumMember | |
| ARCCore.StorageFile.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ConnectionInstructionP.Subscription | ARCCore | EnumMember | The actual subscripton. This is what the connecting party / (downstream) client would send over its TCP/IP connection to the (upstream) server. |
| ARCCore.Subscription | ARCCore | Class | A stream -Subscription- is the concept of how nodes (see -ARNodeType-) subscribe to the -PropertyStream- (either the whole stream or just part of it) in a distributed manner. |
| ARCCore.ConnectionInstructionP.MultipleConnectionUsage | ARCCore | EnumMember | |
| ARCCore.Subscription.FromTime | ARCCore | ClassMember | TODO: Implement concept of specifying starting-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.ConnectionInstructionP.Sharding | ARCCore | EnumMember | |
| ARCCore.Subscription.ToTime | ARCCore | ClassMember | TODO: Implement concept of specifying ending-point in TIME (often for an -AdHocQuery-?). |
| ARCCore.MultipleConnectionUsage | ARCCore | Enum | Enables fault-tolerance by describing use of multiple connections |
| ARCCore.Subscription.IsMatch Overload1 | ARCCore | ClassMember | Evaluates a query consisting of multiple instances of -Subscription- against a single property stream line. |
| ARCCore.MultipleConnectionUsage.Admin | ARCCore | EnumMember | Connection is a special administrative connection to a central 'command-and-control' server which instructs which connections to make. |
| ARCCore.Subscription.IsMatch Overload2 | ARCCore | ClassMember | Evaluates this instance of -Subscription- against a single property stream line (which has been split up into its constituent elements). |
| ARCCore.StreamProcessorP.IncomingConnectionsPortNo | ARCCore | EnumMember | If not set, then class will not listen for incoming connections (meaning that our application is probably a -Client-). |
| ARCCore.UtilCore.TryGetTypeFromStringFromCache | ARCCore | ClassMember | Corresponding method for creating string-representation of type is -ToStringDB-. |
| ARCCore.StreamProcessorP.UnderClosure | ARCCore | EnumMember | Set to TRUE if to be closed, whenever an exception occurs or when class goes out of scope |
| ARCCore.UtilCore.GetExceptionChainAsString | ARCCore | ClassMember | Follows the chain of InnerException and returns types as comma-separated string |
| ARCCore.StreamProcessorP.WriteToConsole | ARCCore | EnumMember | If true then incoming data (from other nodes will be written to console. |
| ARCCore.UtilCore.GetExeptionDetails | ARCCore | ClassMember | Gives as much information about exception as possible. |
| ARCCore.StreamProcessorP.Timestamp | ARCCore | EnumMember | The timestamp inserted at regular intervals in the -PropertyStream- according to -TimestampResolution-. |
| ARCCore.UtilCore.DateTimeTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.StreamProcessorP.TimestampIsOld | ARCCore | EnumMember | A warning sent by -StreamProcessor- to -OutsideLocalReceiver- when it knows that data as served is out of date. |
| ARCCore.UtilCore.TimeSpanTryParse | ARCCore | ClassMember | Accepts on of the formats specified in -ValidDateTimeFormats-. |
| ARCCore.StreamProcessorP.TimestampResolution | ARCCore | EnumMember | The time interval between each timestamp update in the -PropertyStream-. |
| ARCCore.UtilCore.UseLocalTimeInsteadOfUTC | ARCCore | ClassMember | By default AgoRapide operates only with UTC time. |
| ARCCore.StreamProcessorP.DoNotStoreLocally | ARCCore | EnumMember | For -Client-, incoming data (as received from a -Outgoing-) is possible to store BOTH to disk, AND to (normally) a -PRich-. |
| ARCCore.UtilCore.DateTimeNow | ARCCore | ClassMember | Returns DateTime.UtcNow unless -UseLocalTimeInsteadOfUTC- has been set to TRUE in which case DateTime.Now is returned. |
| ARCCore.StreamProcessorP.DoNotStoreLocalOriginLocally | ARCCore | EnumMember | Means 'do not store local origin locally but wait until it gets confirmed by core storage'. |
| ARCCore.UtilCore.CurrentlyStartingUp | ARCCore | ClassMember | Called once at application startup after all Attribute instances in the C# code has been processed. |
| ARCCore.StorageFileP.Filename | ARCCore | EnumMember | |
| ARCCore.REx.Dec | ARCCore | ClassMember | This method should be called from inside a 'finally' block, in order to secure its execution, if not your static recursion depth counter could slowly increase over time due to exceptions ocurring after call to -Inc- but before call to -Dec-. |
| ARCCore.StorageFileP.Hash | ARCCore | EnumMember | Hash of storage file. Not implemented as of Apr 2020. It is envisaged to store hash-value as last line in storage file. In this case the hash must be the hash of the file excluding the last line |
| ARCCore.InvalidTypeException | ARCCore | Class | |
| ARCCore.ConnectionDirection | ARCCore | Enum | The concept of who took the initiative for the connections (who asked to open the TCP/IP session). |
| ARCCore.InvalidTypeException.AssertAssignable | ARCCore | ClassMember | Asserts that expectedType.IsAssignableFrom(foundType) |
| ARCCore.ConnectionDirection.Incoming | ARCCore | EnumMember | ConnectionInstruction will not be set for these. |
| ARCCore.InvalidTypeException.AssertEquals | ARCCore | ClassMember | Asserts that expectedType.Equals(foundType) |
| ARCCore.ConnectionDirection.Outgoing | ARCCore | EnumMember | There would normally exist two live outgoing connection at a given point in time for -Client- / -ArmDB-: |
| ARCCore.TValue | ARCCore | Class | Placeholder for any class type suitable as generic type parameter -PValue-. |
| ARCCore.DataTransferDirection | ARCCore | Enum | Direction for transfer of data. |
| ARCCore.BaseAttribute+IncorrectAttributeTypeUsedException | ARCCore | Class | Helps to clean up any confusion about which -BaseAttribute- to use in a given concept. |
| ARCCore.DataTransferDirection.Send | ARCCore | EnumMember | Like -Client- sending in-application generated properties to -ArmDB- / -CoreDB- or -ArmDB- sending data received over an incoming connection to -CoreDB-. |
| ARCCore.PK+BasePKAttributeNotFoundException<T> | ARCCore | Class | Explains how to implement a given -BasePKAttribute- for an enum |
| ARCCore.DataTransferDirection.Receive | ARCCore | EnumMember | Like -Client- receiving data from an upstream -ArmDB- / -CoreDB- or -ArmDB- receiving data from an upstream -CoreDB-. |
| ARCCore.PK+PKBoolPair | ARCCore | Class | Used to signify that a given -PK- returned from value factory inside -FromEnum- has not been initialized (has not yet been populated with -PKTypeAttribute- collection). |
| ARCDoc.Apple.Name | ARCDoc | ClassMember | Convenience method, not obligatory. |
| ARCCore.BaseAttributeP.LongDescription | ARCCore | EnumMember | The long (detailed) description for the attribute. |
| ARCDoc.Banana | ARCDoc | Class | Implements -IP- directly and uses traditional property storage for optimum -MemoryConsumption- efficiency. |
| ARCCore.ClassAttributeP | ARCCore | Enum | Describes class -ClassAttribute-. |
| ARCDoc.Banana.Name | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.ClassAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCDoc.Banana.Colour | ARCDoc | ClassMember | Annotated as nullable in order to keep flexibility of -PropertyAccess-, including what happens if values are not set (TryGetP etc) |
| ARCCore.ClassAttributeP.ClassNamespace | ARCCore | EnumMember | The namespace for -ClassType-. |
| ARCDoc.Demonstrator | ARCDoc | Class | Demonstrates various concepts from -ARCCore-, especially -PropertyAccess-. |
| ARCCore.ClassAttributeP.ClassType | ARCCore | EnumMember | The actual type that we are a -ClassAttribute- for |
| ARCDoc.Demonstrator.DemonstratePropertyAccessApple | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Apple- class. |
| ARCCore.ClassAttributeP.BaseTypes | ARCCore | EnumMember | The inheritance hierarchy for this class, starting with base type (excluding 'object').r Not set if class does not inherit any class except 'object' |
| ARCDoc.Demonstrator.DemonstratePropertyAccessOrange | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Orange- class. |
| ARCCore.ClassAttributeP.SubTypes | ARCCore | EnumMember | Direct and indirect sub types of this class. |
| ARCDoc.Demonstrator.DemonstratePropertyAccessBanana | ARCDoc | ClassMember | Demonstrates use of -PropertyAccess- through the -Banana- class. |
| ARCCore.ClassAttributeP.Interfaces | ARCCore | EnumMember | All interfaces that this class and its base classes implement |
| ARCDoc.DocLink.AHrefEndPart | ARCDoc | ClassMember | 'Filename.Encoded + "> + LinkWordHTML + </a>' |
| ARCCore.EnumAttributeP.AssemblyName | ARCCore | EnumMember | The assembly in which this class resides. |
| ARCDoc.DocLinkCollection | ARCDoc | Class | Contains a collection of -DocLink- objects. |
| ARCCore.EnumAttributeP.EnumNamespace | ARCCore | EnumMember | The namespace for -EnumType-. |
| ARCDoc.DocLinkCollection.Create | ARCDoc | ClassMember | Notes all locations and their positions in the hierarchical directory structure. |
| ARCCore.EnumAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCDoc.DocLinkCollection.InsertLinks | ARCDoc | ClassMember | Does -LinkInsertionInDocumentation- on the given HTML content. |
| ARCCore.EnumAttributeP.AREnumType | ARCCore | EnumMember | Note that will default to -__invalid- if not explicit set. |
| ARCDoc.DocLinkCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.EnumAttributeP.CorrespondingClass | ARCCore | EnumMember | Only relevant when -PropertyKeyEnum-. |
| ARCDoc.DocLinkCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.EnumMemberAttributeP | ARCCore | Enum | Describes class -EnumMemberAttribute-. |
| ARCDoc.DocLinkResolution | ARCDoc | Class | Contains a resolution page for a link word which has duplicate 'targets' (pointing to multiple -DocLink- instances). |
| ARCCore.EnumMemberAttributeP.EnumType | ARCCore | EnumMember | The type of the enum (like type of 'CustomerP' in CustomerP.FirstName) that we are an attribute for |
| ARCDoc.DocLinkResolution.ToHTMLSimpleSingle | ARCDoc | ClassMember | Gives a friendly description about possible targets for LinkWord-. |
| ARCCore.EnumMemberAttributeP.EnumMember | ARCCore | EnumMember | The actual enum member / enum value (like 'Firstname' in CustomerP.FirstName) that we are an attribute for |
| ARCDoc.DummyEnum.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCQuery.CompoundInvalidKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.DummyEnum.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.CompoundInvalidKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.Extensions | ARCDoc | Class | Contains various extension methods for -IP- and -IKIP- related to documentating / reporting / HTML. |
| ARCQuery.CompoundKey | ARCQuery | Class | A class able to expand the concept of entity keys. |
| ARCDoc.Extensions.ToHTMLSimpleSingleRecursive | ARCDoc | ClassMember | Calls -ToHTMLSimpleSingle- recursively. |
| ARCQuery.CompoundKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.Extensions.ToHTMLSimpleSingle | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter. |
| ARCQuery.CompoundKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.Extensions.ToHTMLSimpleSingleInternal | ARCDoc | ClassMember | Hack in order to escape check for direct implementation in actual class of -ToHTMLSimpleSingle- in -ToHTMLSimpleSingle-. |
| ARCQuery.CompoundKey.Parse | ARCQuery | ClassMember | Note that no TryParse is offered here, because Parse will always succeed (it just returns -CompoundInvalidKey- if 'fails'). |
| ARCDoc.Extensions.ToHTMLSimpleAsTableRow | ARCDoc | ClassMember | Creates a simple HTML representation of the given parameter as a single two column row (Key, Value) in a table. |
| ARCQuery.CompoundKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.Extensions.DescribeValue | ARCDoc | ClassMember | Describes the value contained withing an -IKIP- (-P-). |
| ARCQuery.CompoundKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.CompoundKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.DocFragP.IsInheritedDoc | ARCDoc | EnumMember | Relevant for class members (methods). |
| ARCQuery.ConstantKey<T> | ARCQuery | Class | Represents a constant expression like "' '", "', '", "42". |
| ARCDoc.DocFragP.Lines | ARCDoc | EnumMember | Number of lines of text in -Description- and -LongDescription- for this fragment. |
| ARCQuery.ConstantKey<T>.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCDoc.DocFragP.Attribute | ARCDoc | EnumMember | The -BaseAttribute- or -PK- from which this -DocFrag- originates. |
| ARCQuery.ConstantKey<T>.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCDoc.DocFragType | ARCDoc | Enum | Type of documentation fragment, like -Assembly-, -Class- or -ClassMember-. |
| ARCQuery.ConstantKey<T>.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCDoc.DocFragType.Assembly | ARCDoc | EnumMember | |
| ARCQuery.ConstantKey<T>.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.DocFragType.Namespace | ARCDoc | EnumMember | |
| ARCQuery.ConstantKey<T>.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.DocFragType.Class | ARCDoc | EnumMember | Does also include interfaces. |
| ARCQuery.EntityMethodKey | ARCQuery | Class | Key able to call read-only methods defined in the entity class with names like 'TryGet{FieldName}'. |
| ARCDoc.DocFragType.ClassMember | ARCDoc | EnumMember | |
| ARCQuery.ForeignKey.AggregateKeys | ARCQuery | ClassMember | Aggregations to be used on the multiple foreign entity values that are found when one of the -Steps- are -ToMany-. |
| ARCDoc.PKDocAttributeP | ARCDoc | Enum | Describes class -PKDocAttribute-. |
| ARCQuery.ForeignKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCDoc.PKDocAttributeP.PriorityOrder | ARCDoc | EnumMember | Used by -DescribeValue-. |
| ARCQuery.ForeignKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCDoc.PriorityOrder | ARCDoc | Enum | Used for general sorting / prioritizing when showing properties for an entity. |
| ARCQuery.ForeignKey.IPRelationsKeysPointingTo | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types with foreign keys pointing to that entity type. |
| ARCDoc.PriorityOrder.NotImportant | ARCDoc | EnumMember | |
| ARCQuery.ForeignKey.IPRelationsKeysPointingFrom | ARCQuery | ClassMember | Contains, for each (entity type) key, a list of entity types which that entity type points to. |
| ARCDoc.PriorityOrder.Important | ARCDoc | EnumMember | |
| ARCQuery.MemberEntityKey | ARCQuery | Class | Can find value for entity which is member of entity being queried. |
| Assembly ARCQuery | Assembly | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| ARCQuery.MemberEntityKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.BinaryOperatorKey | ARCQuery | Class | Offers expressions with operators like +, -, * and /. |
| ARCQuery.MemberEntityKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.BinaryOperatorKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.MemberEntityKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.BinaryOperatorKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.MemberEntityKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.BinaryOperatorKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.MemberEntityKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.BinaryOperatorKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile | ARCQuery | Class | A -CompoundKey- containing some function keys or quantile key operating on an existing property of the entity in question. |
| ARCQuery.BinaryOperatorKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.CompoundInvalidKey | ARCQuery | Class | Used as a practical solution in order to know that a given key has been attemped parsed, but was not valid. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.CompoundInvalidKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.CompoundInvalidKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile..ctor | ARCQuery | ClassMember | Note that calling only this constructor without afterwards setting -FunctionKeys- and / or -QuantileKey- would be meaningless. |
| ARCQuery.CompoundInvalidKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyDayOfWeek.SyntaxHelp | ARCQuery | ClassMember | 'DayOfWeek()' |
| ARCQuery.EntityMethodKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyDouble | ARCQuery | Class | Converts an integer to a double (decimal value). |
| ARCQuery.EntityMethodKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyDouble.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.EntityMethodKey.AllEntityMethodKeysForEntityType | ARCQuery | ClassMember | Returns methods for the given entity type that can be used by -EntityMethodKey-. |
| ARCQuery.FunctionKeyDouble.SyntaxHelp | ARCQuery | ClassMember | 'Double()' |
| ARCQuery.EntityMethodKey.TryGetForeignField | ARCQuery | ClassMember | Returns foreign field through foreign key given. |
| ARCQuery.FunctionKeyFirstLine | ARCQuery | Class | Extracts first line from string of text. |
| ARCQuery.EntityMethodKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyFirstLine.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.EntityMethodKey.Method | ARCQuery | ClassMember | The actuall TryGet method implemented in the relevant entity class. |
| ARCQuery.FunctionKeyFirstLine.SyntaxHelp | ARCQuery | ClassMember | 'FirstLine()' |
| ARCQuery.EntityMethodKey.FunctionKeys | |||
| ARCQuery.FunctionKeyHourMinute | ARCQuery | Class | Formats a timespan with only the hour and minute part. Uses format hh:mm. |
| ARCQuery.EntityMethodKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyHourMinute.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.ForeignKey | ARCQuery | Class | Can find related values, through compound field names. |
| ARCQuery.FunctionKeyHourMinute.SyntaxHelp | ARCQuery | ClassMember | 'HourMinute()' |
| ARCQuery.ForeignKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyInt | ARCQuery | Class | Rounds a double value to the nearest integer (uses .NET data type Int64 (long)). |
| ARCQuery.ForeignKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyInt.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.ForeignKey.AllForeignKeysForEntityType | ARCQuery | ClassMember | Returns all possible foreign keys relevant for the given entity type, like for Order: 'Customer.FirstName' and 'Customer.LastName'. |
| ARCQuery.FunctionKeyInt.SyntaxHelp | ARCQuery | ClassMember | 'Int()' |
| ARCQuery.ForeignKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyLength | ARCQuery | Class | Returns length of (string) value of field, like 4 for 'John'. |
| ARCQuery.ForeignKey.Steps | ARCQuery | ClassMember | The actual -ForeignKeySingleStep- leading to the -ForeignField-. |
| ARCQuery.FunctionKeyLength.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.ForeignKey.StepsAreOnlyDirectionToOne | ARCQuery | ClassMember | If TRUE then -TryGetPInternal) will use much simpler code without collections and parallell executions. |
| ARCQuery.FunctionKeyLength.SyntaxHelp | ARCQuery | ClassMember | 'Length()' |
| ARCQuery.ForeignKey.ForeignField | ARCQuery | ClassMember | The actual field in the final foreign entity to return value for. |
| ARCQuery.FunctionKeyYearWeek.SyntaxHelp | ARCQuery | ClassMember | 'YearWeek()' |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.NewKey | ARCQuery | Class | A function creating new keys (new fields) that can be used against all object types in AgoRapide (against all entities). |
| ARCQuery.OrdinaryKeyPlusFunctionOrQuantile.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.NewKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.Extensions | ARCQuery | Class | |
| ARCQuery.NewKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.Extensions.TryGetP | ARCQuery | ClassMember | Same functionality as -TryGetP- but understands the concept of -CompoundKey-. |
| ARCQuery.NewKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCQuery.FunctionKeyAggregate | ARCQuery | Class | Operates over a collection of properties. |
| ARCQuery.NewKey.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyAggregate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKey.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyAggregateAvg | ARCQuery | Class | Calculates the average of the given properties. |
| ARCQuery.NewKey.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyAggregateAvg.SyntaxHelp | ARCQuery | ClassMember | 'Avg()' |
| ARCQuery.NewKey.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyAggregateCount | ARCQuery | Class | Counts the number of properties found. |
| ARCQuery.NewKey.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyAggregateCount.SyntaxHelp | ARCQuery | ClassMember | 'Count()' |
| ARCQuery.NewKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -NewKey-. |
| ARCQuery.FunctionKeyAggregateDistinct | ARCQuery | Class | Returns a list of the distinct values of the given properties. |
| ARCQuery.NewKeyCountP | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCQuery.FunctionKeyAggregateDistinct.SyntaxHelp | ARCQuery | ClassMember | 'Distinct()' |
| ARCQuery.NewKeyCountP.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyAggregateJoin | ARCQuery | Class | Joins the given list of properties into a single property. |
| ARCQuery.NewKeyCountP.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyAggregateJoin.SyntaxHelp | ARCQuery | ClassMember | 'Join()' |
| ARCQuery.NewKeyCountP.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyAggregateMax | |||
| ARCQuery.NewKeyCountP.SyntaxHelp | ARCQuery | ClassMember | 'CountP()' |
| ARCQuery.FunctionKeyAggregateMax.SyntaxHelp | ARCQuery | ClassMember | 'Max()' |
| ARCQuery.NewKeyCountP.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyMonth | ARCQuery | Class | Extracts month component from field like '2020-12-09' becoming '12'. |
| ARCQuery.NewKeyCountP.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountPRec | ARCQuery | Class | Returns the number of properties for a given entity object. |
| ARCQuery.FunctionKeyMonth.SyntaxHelp | ARCQuery | ClassMember | 'Month()' |
| ARCQuery.NewKeyCountPRec.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyQuarter | ARCQuery | Class | Extracts quarter component from datetime field like '2020-12-09' becoming 'Q4'. |
| ARCQuery.NewKeyCountPRec.CountPRec | ARCQuery | ClassMember | Counts recursively the number of properties for a given entity object. |
| ARCQuery.FunctionKeyQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountPRec.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyQuarter.SyntaxHelp | ARCQuery | ClassMember | 'Quarter()' |
| ARCQuery.NewKeyCountPRec.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyTMB | ARCQuery | Class | TMB = Thousands, Millions, Billions. |
| ARCQuery.NewKeyCountPRec.SyntaxHelp | ARCQuery | ClassMember | 'CountPRec()' |
| ARCQuery.FunctionKeyTMB.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyCountPRec.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyTMB.SyntaxHelp | ARCQuery | ClassMember | 'TMB()' |
| ARCQuery.NewKeyCountPRec.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.FunctionKeyTotalHours | ARCQuery | Class | Converts a timespan to total hours (as an integer). |
| ARCQuery.NewKeyGetType | ARCQuery | Class | Returns the internal C# object type of the given object. |
| ARCQuery.FunctionKeyTotalHours.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyGetType.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.FunctionKeyTotalHours.SyntaxHelp | ARCQuery | ClassMember | 'TotalHours()' |
| ARCQuery.NewKeyGetType.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.FunctionKeyTotalMinutes | ARCQuery | Class | Converts a timespan to total minutes (as an integer). |
| ARCQuery.NewKeyGetType.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.FunctionKeyTotalMinutes.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.NewKeyGetType.SyntaxHelp | ARCQuery | ClassMember | 'GetType()' |
| ARCQuery.FunctionKeyTotalMinutes.SyntaxHelp | ARCQuery | ClassMember | 'TotalMinutes()' |
| ARCQuery.NewKeyGetType.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.FunctionKeyType | ARCQuery | Class | Returns the type of a property. |
| ARCQuery.QueryExpressionAll | ARCQuery | Class | Represents all entities for a given collection. |
| ARCQuery.FunctionKeyType.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionAll.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.FunctionKeyType.SyntaxHelp | ARCQuery | ClassMember | 'Type()' |
| ARCQuery.QueryExpressionAll.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.FunctionKeyWeek | ARCQuery | Class | Extract week-number from field according to ISO 8601. |
| ARCQuery.QueryExpressionAll.SyntaxHelp | ARCQuery | ClassMember | 'ALL' (literally). |
| ARCQuery.FunctionKeyWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionCache | ARCQuery | Class | Describes if cache is to be used or not. |
| ARCQuery.FunctionKeyWeek.SyntaxHelp | ARCQuery | ClassMember | 'Week()' |
| ARCQuery.QueryExpressionCache.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.FunctionKeyYear | ARCQuery | Class | Extracts Year-component from field. |
| ARCQuery.QueryExpressionCache.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.FunctionKeyYear.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionCache.SyntaxHelp | ARCQuery | ClassMember | CACHE {ON|OFF} |
| ARCQuery.FunctionKeyYear.SyntaxHelp | ARCQuery | ClassMember | 'Year()' |
| ARCQuery.QueryExpressionHint | ARCQuery | Class | Describes if hints are to be generated (as query progresses) for potential new queries. |
| ARCQuery.FunctionKeyYearMonth | ARCQuery | Class | Extracts Year + Month component from field like 2020-06. |
| ARCQuery.QueryExpressionHint.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.FunctionKeyYearMonth.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionHint.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.FunctionKeyYearMonth.SyntaxHelp | ARCQuery | ClassMember | 'YearMonth()' |
| ARCQuery.QueryExpressionHint.SyntaxHelp | ARCQuery | ClassMember | HINT {ON|OFF} |
| ARCQuery.FunctionKeyYearQuarter | ARCQuery | Class | Extracts Year + Quarter component from field like 2020Q1. |
| ARCQuery.QueryExpressionLimit | ARCQuery | Class | Limits the final HTML presentation of results (limits the number of elements being presented). |
| ARCQuery.FunctionKeyYearQuarter.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionLimit.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.FunctionKeyYearQuarter.SyntaxHelp | ARCQuery | ClassMember | 'YearQuarter()' |
| ARCQuery.QueryExpressionLimit.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.FunctionKeyYearWeek | ARCQuery | Class | Extract year and week number from field according to ISO 8601 like '2021-51' |
| ARCQuery.QueryExpressionLimit.SyntaxHelp | ARCQuery | ClassMember | Syntax: LIMIT {limit} like 'LIMIT 42' |
| ARCQuery.FunctionKeyYearWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryExpressionLog | ARCQuery | Class | A debugging tool used to extract detailed log information about the execution of the query. |
| ARCQuery.NewKeyGetType.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QueryExpressionLog.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.NewKeyToPropertyStream | ARCQuery | Class | Returns the -PropertyStream- representation of the given object. |
| ARCQuery.QueryExpressionLog.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.NewKeyToPropertyStream.TryGetPInternal | ARCQuery | ClassMember | The internal executor, containing the specific functionality for how to evaluate the key. |
| ARCQuery.QueryExpressionLog.SyntaxHelp | ARCQuery | ClassMember | 'Log'. |
| ARCQuery.NewKeyToPropertyStream.ToString | ARCQuery | ClassMember | The ToString representation is the one relevant when used as key, like in -IK- or when selecting like 'SELECT {fieldName}'. |
| ARCQuery.QueryExpressionOrderBy | ARCQuery | Class | Orders collection. |
| ARCQuery.NewKeyToPropertyStream.TryGetP | ARCQuery | ClassMember | The outwards facing executor, understanding use of -FunctionKeys-. |
| ARCQuery.QueryExpressionOrderBy.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.NewKeyToPropertyStream.SyntaxHelp | ARCQuery | ClassMember | 'ToPropertyStream()' |
| ARCQuery.QueryExpressionOrderBy.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.NewKeyToPropertyStream.FunctionKeys | ARCQuery | ClassMember | All -FunctionKey-s chained at end of compound key (but before an eventual -QuantileKey-). |
| ARCQuery.QueryExpressionOrderBy.SyntaxHelp | ARCQuery | ClassMember | ORDER BY {key} [DESC] / [ASC] |
| ARCQuery.NewKeyToPropertyStream.QuantileKey | ARCQuery | ClassMember | Eventual final -QuantileKey- at end of compound key. |
| ARCQuery.QueryExpressionOrderBy.Key | ARCQuery | ClassMember | TODO: Expand syntax to include multiple keys |
| ARCQuery.QuantileKey | ARCQuery | Class | Can separate entities into quantiles, like Quartiles, Quintiles or Sextiles. |
| ARCQuery.QueryExpressionPivot | ARCQuery | Class | Creates a table by querying over two keys like |
| ARCQuery.QuantileKey.TryGetP | ARCQuery | ClassMember | Returns an integer with the number of the quantile group for the value returned by the given -CompoundKey-). |
| ARCQuery.QueryExpressionPivot.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.QuantileKey.TryParse | ARCQuery | ClassMember | Note that any value (positive integer greated than 2) is accepted, not necessarily only string-representations of enums within -Quantile-. |
| ARCQuery.QueryExpressionPivot.GetCrossSummationChecker | ARCQuery | ClassMember | Returns a cross sum checker for int, long, double, Timespan. |
| ARCQuery.Query | ARCQuery | Class | Keeps track of progress of query, and the interim result. |
| ARCQuery.QueryExpressionPivot.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.Query.ShouldTerminate | ARCQuery | ClassMember | Attempts to explain problem, in -TerminateReason- and by logging. |
| ARCQuery.QueryExpressionPivot.SyntaxHelp | ARCQuery | ClassMember | 1) 'PIVOT {rowKey} BY {columnKey}' like "PIVOT Colour BY Production.Year" |
| ARCQuery.Query.ExecuteOne | ARCQuery | ClassMember | NOTE: Note how avoids deferred execution in order to always correctly time execution of each query element separately. |
| ARCQuery.QueryExpressionPivot.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.Query.AllLogEntriesForThisQuery | ARCQuery | ClassMember | Temporary storage of log information. |
| ARCQuery.QueryExpressionPivot.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.Query.Progress | ARCQuery | ClassMember | Use of member class in order for -Query- not to inherit -IP-. |
| ARCQuery.ValueComparer.TryGetPrevious | ARCQuery | ClassMember | Suggestion for previous query (browsing 'backwards') |
| ARCQuery.QueryExpression | ARCQuery | Class | Represents part of a query (or actually a transformation) against a given collection and the data storage from which it was taken. |
| ARCQuery.ValueComparer.TryGetNext | ARCQuery | ClassMember | Suggestion for next query (browsing 'forwards') |
| ARCQuery.QueryExpression.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.ValueComparerDateTime | ARCQuery | Class | -ValueComparerDateTime- is an attempt at offering a human language interface for date and time queries. |
| ARCQuery.QueryExpression.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.ValueComparerDateTime.TryGetPrevious | ARCQuery | ClassMember | Suggestion for previous query (browsing 'backwards') |
| ARCQuery.QueryExpression.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.ValueComparerDateTime.TryGetNext | ARCQuery | ClassMember | Suggestion for next query (browsing 'forwards') |
| ARCQuery.QueryExpression.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.ValueComparerDateTime.TryParse | ARCQuery | ClassMember | Note: This parser is probably exhaustive but not necessarily logical |
| ARCQuery.QueryExpression.Parsers | ARCQuery | ClassMember | Parsers for all the relevant sub classes of -QueryExpression-. |
| ARCQuery.ValueComparerDateTime.Resolution | ARCQuery | ClassMember | See -ResolutionEnum-. |
| ARCQuery.QueryExpressionWithSuggestions | ARCQuery | Class | Keeps track as each query item gets executed. |
| ARCQuery.ValueComparerDateTime.Steps | ARCQuery | ClassMember | Value 0 would mean 'This', like ThisHour, Today, ThisMonth and so on. |
| ARCQuery.QueryExpressionWithSuggestions.Previous | ARCQuery | ClassMember | Suggestion for a 'browse backwards' button. |
| ARCQuery.ValueComparerDateTime.IsGliding | ARCQuery | ClassMember | The modifier 'Gliding' (or just 'G') can be appended in order to mean continous gliding periode, so for instance |
| ARCQuery.QueryExpressionWithSuggestions.Next | ARCQuery | ClassMember | Suggestion for a 'browse forwards' button. |
| ARCQuery.ValueComparerDateTime.IsBefore | ARCQuery | ClassMember | The modifier 'Before' can be prepended in order to mean from any time before the specified time. |
| ARCQuery.QueryExpressionAggregate | ARCQuery | Class | Aggregates over the given key. |
| ARCQuery.ValueComparerDateTime.IsAfter | ARCQuery | ClassMember | The modifier 'After' can be prepended in order to mean any time after the specified time. |
| ARCQuery.QueryExpressionAggregate.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.ValueComparerDateTime.IsInterval | ARCQuery | ClassMember | Normally the interval which is compared against is the timespan corresponding to -Resolution-. |
| ARCQuery.QueryExpressionAggregate.IsSuitableAggregator | ARCQuery | ClassMember | Returns true if |
| ARCQuery.ValueComparerDateTime.InitValue | ARCQuery | ClassMember | For debugging purposes. The initial 'now' value used before calculating -StartPeriod- and -EndPeriod-. |
| ARCQuery.QueryExpressionAggregate.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.ValueComparerDateTime.StartPeriod | ARCQuery | ClassMember | The start of the interval which this instance compares against. |
| ARCQuery.QueryExpressionAggregate.SyntaxHelp | ARCQuery | ClassMember | 1) 'AGGREGATE {rowKey}' like "AGGREGATE Product" |
| ARCQuery.ValueComparerDateTime.EndPeriod | ARCQuery | ClassMember | The end of the interval which this instance compares against. |
| ARCQuery.QueryExpressionAggregate.AggregationType | ARCQuery | ClassMember | Most common value is -Count-, in which case -AggregationKey- may be correspondingly set to null. |
| ARCQuery.ValueComparerDateTime.ToDebugProperties | ARCQuery | ClassMember | Exposes all members of this class. |
| ARCQuery.QueryExpressionAggregate.AggregationKey | ARCQuery | ClassMember | This is often null (with -AggregationType- correspondingly set to Count-). |
| ARCQuery.ForeignKey+IKIPEqualityComparer | ARCQuery | Class | Used by -TryGetPInternal- when it needs distinct list of foreign entities, based on their keys |
| ARCQuery.QueryExpressionRel | ARCQuery | Class | Enables 'jumping' or 'travelling' from a collection of one entity type to another (related) entity type. |
| ARCQuery.ForeignKey+ForeignKeySingleStep | ARCQuery | Class | |
| ARCQuery.QueryExpressionRel.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignType | ARCQuery | ClassMember | The foreign type. |
| ARCQuery.QueryExpressionRel.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCQuery.ForeignKey+ForeignKeySingleStep.ActualForeignKey | ARCQuery | ClassMember | The actual foreign key like OrderId or CustomerId to use for this step |
| ARCQuery.QueryExpressionRel.SyntaxHelp | ARCQuery | ClassMember | 'REL {type}' |
| ARCQuery.ForeignKey+ForeignKeySingleStep.ForeignEntities | ARCQuery | ClassMember | The collection containing all the (foreign) entities for the type that this step leads to |
| ARCQuery.QueryExpressionRel.StrType | ARCQuery | ClassMember | The -ToStringVeryShort- representation of the type that we are 'jumping' to. |
| ARCQuery.ForeignKeyDirection | ARCQuery | Enum | Describes the type of traversing to a foreign entity possible. |
| ARCQuery.QueryExpressionSelect | ARCQuery | Class | Selects which fields to include. |
| ARCQuery.ForeignKeyDirection.ToOne | ARCQuery | EnumMember | Traverse to one entity, like traversing from OrderLine to Order (based on OrderLine containing foreign key OrderId) or Order to Customer (based on Order containing foreign key CustomerId). |
| ARCQuery.QueryExpressionSelect.Execute | ARCQuery | ClassMember | Transforms the given input collection into a resulting collection. |
| ARCQuery.ForeignKeyDirection.ToMany | ARCQuery | EnumMember | Traverse to many entities, like traversing from Customer to Order (based on Order containing foreign key CustomerId) or Order to OrderLine (based on OrderLine containing foreign key OrderId). |
| ARCQuery.QueryExpressionSelect.TryCheckForExistenceOfKey | ARCQuery | ClassMember | Used by query expressions in order to catch wrong field names used or misspelling of field names. |
| ARCDoc.Extensions.ValueToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Value with description as a 'tooltip'. |
| ARCDoc.Extensions.KeyToHTMLSimpleWithTooltip | ARCDoc | ClassMember | Creates a simple HTML representation of the Key with description as a 'tooltip'. |
| ARCDoc.HLocation | ARCDoc | Class | Simple class describing the location of a single -IP- instance within some hierarhical context. |
| ARCDoc.HLocation.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HLocation.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HLocation.Content | ARCDoc | ClassMember | The Content object is not stored within the standard -IP--mechanism. |
| ARCDoc.HLocationCollection | ARCDoc | Class | Contains a collection of -HLocation- objects. |
| ARCDoc.HLocationCollection.Create | ARCDoc | ClassMember | Transforms the parameter (and recursively all contained objects) into a collection of -HLocation- objects. |
| ARCQuery.FunctionKeyAggregateMin | ARCQuery | Class | Calculates the minimum value of the given properties. |
| ARCQuery.FunctionKeyAggregateMin.SyntaxHelp | ARCQuery | ClassMember | 'Min()' |
| ARCQuery.FunctionKeyAggregateSum | ARCQuery | Class | Sums the given properties. |
| ARCQuery.FunctionKeyAggregateSum.SyntaxHelp | ARCQuery | ClassMember | 'Sum()' |
| ARCQuery.FunctionKey | ARCQuery | Class | Extracts data from an already existing value like extracting Year from a DateTime in 'Created.Year()'. |
| ARCQuery.FunctionKey.TryGetP Overload1 | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKey.AddParser | ARCQuery | ClassMember | Adds a -ApplicationSpecificCode- parser. |
| ARCQuery.FunctionKey.TryParse | ARCQuery | ClassMember | Find parsers from -Parsers- based on first word in query. |
| ARCQuery.FunctionKey.TryParseSingleWord | ARCQuery | ClassMember | Recommended parser to use for functions without parameters. |
| ARCQuery.FunctionKey.TryGetP Overload2 | ARCQuery | ClassMember | Overload which will try to call -TryGetV- with generic type parameter, and if that does not succeed will try to call the optional 'tryParser'. |
| ARCQuery.FunctionKey.Parsers | ARCQuery | ClassMember | Instances of all the relevant sub classes of -FunctionKey-. |
| ARCQuery.FunctionKeyDate | ARCQuery | Class | Formats a date without time component. |
| ARCQuery.FunctionKeyDate.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.FunctionKeyDate.SyntaxHelp | ARCQuery | ClassMember | 'Date()' |
| ARCQuery.FunctionKeyDayOfWeek | ARCQuery | Class | Extracts DayOfWeek from field like 'Monday', 'Tuesday' and so on. |
| ARCQuery.FunctionKeyDayOfWeek.TryGetP | ARCQuery | ClassMember | NOTE: The in-parameter is a property, not an entity. |
| ARCQuery.QueryProgress.ToJSONSerializeable | ARCQuery | ClassMember | Override of default interface method -ToJSONSerializeable- is necessary because resulting data is 'hidden' within -Result-. |
| ARCQuery.QueryProgress.PreviousQueryJustExecuted | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryProgress.NextQueryToExecute | ARCQuery | ClassMember | TODO: This is somewhat loosely associated. |
| ARCQuery.QueryProgress.ToHTMLSimpleSingle | ARCQuery | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCQuery.QueryProgress.OrderAndReconstructKeys | ARCQuery | ClassMember | Part 1: |
| ARCQuery.QueryProgress.GetHTMLLinksToIndividualQueryParts | ARCQuery | ClassMember | Is able to generate the following: |
| ARCQuery.QueryProgress.ToString | ARCQuery | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCQuery.QueryProgress.Result | ARCQuery | ClassMember | This gets updated continously as the different query expressions get evaluated. |
| ARCQuery.QueryProgress.ExecutedQueries | ARCQuery | ClassMember | The result from calling -Execute- for each query in -Queries-. |
| ARCQuery.QueryProgress.AdditionalJavascriptUrlEncoder | ARCQuery | ClassMember | Returns the Javascript code for converting characters that are difficult to pass in URLs to a format understood by -Decode-. |
| ARCQuery.UtilQuery | ARCQuery | Class | Utility methods for -ARCQuery-. |
| ARCQuery.UtilQuery.IndexOfOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOf except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.UtilQuery.IndexOfAnyOutsideOf | ARCQuery | ClassMember | Equivalent to string.IndexOfAny except that any character encountered inside pairs of the 'outsideOf'-char are not counted. |
| ARCQuery.UtilQuery.SplitOutsideOf | ARCQuery | ClassMember | Equivalent to string.Split except that any character encountered inside pairs of the 'outsideOf'-char are not counted as separators. |
| ARCQuery.UtilQuery.SpecialLinkPrefixes | ARCQuery | ClassMember | Contains prefixes for which links (see -LinkInsertionInDocumentation-) are also desired without the prefix. |
| ARCQuery.ValueComparer | ARCQuery | Class | Can evaluation expressions like 'WHERE Created = ThisYear. |
| ARCAPI.DataStorage.DocLinks | ARCAPI | ClassMember | Note that may be null. |
| ARCAPI.DataStorage.Lock | ARCAPI | ClassMember | Locking object for thread-safe access from simultaneous API requests. |
| ARCAPI.DataStorage.ExternalReceiver | ARCAPI | ClassMember | Typically used by -AddController-. |
| ARCAPI.DataStorage.DoNotStoreInternally | ARCAPI | ClassMember | Typically used by -AddController-. |
| ARCAPI.BaseControllerP | ARCAPI | Enum | Describes class -BaseController-. |
| ARCAPI.BaseControllerP.CountRequest | ARCAPI | EnumMember | Number of calls to -APIMethod- since application initialization |
| ARCAPI.BaseControllerP.CountException | ARCAPI | EnumMember | Number of exceptions at call to -APIMethod- since application initialization |
| ARCAPI.BaseControllerP.LogLevel | ARCAPI | EnumMember | |
| ARCAPI.ResponseFormat | ARCAPI | Enum | The response format, HTML or JSON, for an API request. |
| ARCAPI.ResponseFormat.JSON | ARCAPI | EnumMember | |
| ARCAPI.ResponseFormat.HTML | ARCAPI | EnumMember | |
| Assembly AgoMail | Assembly | ||
| AgoMail.Cleaner | AgoMail | Class | |
| AgoMail.Cleaner.Clean | AgoMail | ClassMember | Removes emails with often seen values for Subject, To or From. |
| AgoMail.Email | AgoMail | Class | |
| AgoMail.Email.TryGetV | AgoMail | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| AgoMail.Email.ToString | AgoMail | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| AgoMail.Program | AgoMail | Class | Application startup and initialization |
| AgoMail.Program.InitStreamProcessor | AgoMail | ClassMember | Initializes stream processor. |
| AgoMail.Root | AgoMail | Class | Contains the user friendly welcome text (front page) for the application. |
| AgoMail.Root.ToHTMLSimpleSingle | AgoMail | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| AgoMail.Root.TryGetV | AgoMail | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| AgoMail.Root.ToString | AgoMail | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| AgoMail.Controllers.ControllerFacade | AgoMail | Class | Facade for entry into the desired -BaseController-. |
| AgoMail.Controllers.ControllerFacade.CatchAll Overload2 | AgoMail | ClassMember | Catches all HTTP GET requests to this API. |
| AgoMail.Controllers.ControllerFacade.CatchAll Overload1 | AgoMail | ClassMember | Catches all HTTP POST requests to this API. |
| AgoMail.EmailP | AgoMail | Enum | |
| AgoMail.EmailP.Date | AgoMail | EnumMember | UTC-format |
| AgoMail.EmailP.From | AgoMail | EnumMember | |
| AgoMail.EmailP.To | AgoMail | EnumMember | |
| AgoMail.EmailP.CC | AgoMail | EnumMember | |
| AgoMail.EmailP.Subject | AgoMail | EnumMember | |
| AgoMail.EmailP.TextBody | AgoMail | EnumMember | |
| AgoMail.EmailP.HTMLBody | AgoMail | EnumMember | |
| AgoMail.EmailP.Headers | AgoMail | EnumMember | |
| AgoMail.EmailP.Attachments | AgoMail | EnumMember | |
| Namespace ARCCore | Namespace | A necessary library (.DLL in Windows terms) that every -ARNodeType- should link to. | |
| Namespace ARCDoc | Namespace | A library supporting documentation and demonstrating usage of AgoRapide. | |
| Namespace ARCQuery | Namespace | ARCQuery provides a query language that mimicks SQL but is usable through HTTP as GET URLs. | |
| Namespace ARCAPI | Namespace | A library providing an API on top of the -PropertyStream-. | |
| Namespace AgoMail | Namespace | ||
| Namespace AgoMail.Controllers | Namespace | ||
| ARCQuery.AggregationType | ARCQuery | Enum | Used by -QueryExpressionPivot- and -QueryExpressionAggregate-. |
| ARCQuery.AggregationType.Count | ARCQuery | EnumMember | |
| ARCQuery.AggregationType.Sum | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator | ARCQuery | Enum | Relational / comparision operators. |
| ARCQuery.RelationalOperator.EQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.CONTAINS | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.NEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.NOTCONTAINS | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.GT | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LT | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.GEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LEQ | ARCQuery | EnumMember | |
| ARCQuery.RelationalOperator.LIKE | ARCQuery | EnumMember | Case sensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.ILIKE | ARCQuery | EnumMember | Case insensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.NOTLIKE | ARCQuery | EnumMember | Case sensitive string wildcard comparision. |
| ARCQuery.RelationalOperator.NOTILIKE | ARCQuery | EnumMember | Case insensitive string wildcard comparision. |
| ARCQuery.Strictness | ARCQuery | Enum | Describes level of -Strictness- when executing query. |
| ARCQuery.Strictness.ON | ARCQuery | EnumMember | |
| ARCQuery.Strictness.OFF | ARCQuery | EnumMember | |
| ARCQuery.Quantile | ARCQuery | Enum | Describes quantiles like -TERTILE- and -QUARTILE-. |
| ARCQuery.Quantile.MEDIAN | ARCQuery | EnumMember | Divide into two parts |
| ARCQuery.Quantile.TERTILE | ARCQuery | EnumMember | Divide into three parts |
| ARCQuery.Quantile.QUARTILE | ARCQuery | EnumMember | Divide into four parts |
| ARCQuery.Quantile.QUINTILE | ARCQuery | EnumMember | Divide into five parts |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Quarter | ARCQuery | EnumMember | |
| ARCQuery.ValueComparerDateTime+ResolutionEnum.Year | ARCQuery | EnumMember | |
| Assembly ARCAPI | Assembly | A library providing an API on top of the -PropertyStream-. | |
| ARCAPI.ContentResult | ARCAPI | Class | Mimicks Microsoft.AspNetCore.Mvc.ContentResult. |
| ARCAPI.ContentResult.CreateHTMLOK | ARCAPI | ClassMember | NOTE: Parameter must be a complete HTML page. |
| ARCAPI.ContentResult.CreateError | ARCAPI | ClassMember | TODO: Add a key / value format for error messages, like done for -Log-. |
| ARCAPI.AddController | ARCAPI | Class | Parses and stores a -PropertyStreamLine-. |
| ARCAPI.AddController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.AddController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.AddController.AllowFilter | ARCAPI | ClassMember | Describes what data is allowed to change through a list of -Subscription- instances. |
| ARCAPI.BaseController | ARCAPI | Class | Contains basic functionality for serving API methods. |
| ARCAPI.BaseController.BuildControllerStorage | ARCAPI | ClassMember | Builds a collection of 'std' (standard) controller instances to use for serving API requests. |
| ARCAPI.BaseController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.BaseController.CatchAll | ARCAPI | ClassMember | Serves the typical single generic API method in an AgoRapide API. |
| ARCAPI.BaseController.TryNavigateToLevelInDataStorage | ARCAPI | ClassMember | Navigates to the specified level (usually within -Storage-). |
| ARCAPI.BaseController.GetFormatAndAdjustRequest | ARCAPI | ClassMember | Decides -ResponseFormat- (like HTML, JSON, CSV, PDF and so on). |
| ARCAPI.BaseController.GetTimestampIsOldWarningHTML | ARCAPI | ClassMember | If -TimestampIsOld- is found in the rootStorage-parameter, returns warning message in HTML format. |
| ARCAPI.BaseController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.EditController | ARCAPI | Class | Offers a simple HTML editing environment of the raw -PropertyStream- from the given key. |
| ARCAPI.EditController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.EditController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.GQController | ARCAPI | Class | Offers GraphQL queries. |
| ARCAPI.GQController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.GQController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.RQController | ARCAPI | Class | RQ = REST Query. Executes a REST like query request against the given -DataStorage-. |
| ARCAPI.RQController.APIMethod | ARCAPI | ClassMember | The (only) API method that this controller supports. |
| ARCAPI.RQController.ToString | ARCAPI | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCAPI.DataStorage | ARCAPI | Class | The all-in-memory global application data storage. |
| ARCAPI.DataStorage.Create | ARCAPI | ClassMember | Creates a -DataStorage- instance with default parameters. |
| ARCAPI.DataStorage..ctor | ARCAPI | ClassMember | This method will: |
| ARCAPI.DataStorage.Storage | ARCAPI | ClassMember | The actual storage. |
| ARCAPI.DataStorage.ControllerStorage | ARCAPI | ClassMember | Usually (but not always) a branch of -Storage- (like Storage["log"]["{nodeId}"]["Controller"]). |
| ARCDoc.Documentator.CreateHTOCStandard | ARCDoc | ClassMember | Creates a 'standard' table of contents, structured by assembly and each assembly divided into 'Class' and 'Enum'. |
| ARCDoc.Documentator.CreateHTOCNamespace | ARCDoc | ClassMember | Creates a table of contents structured by namespace |
| ARCDoc.Documentator.CreateHTOCInheritance | ARCDoc | ClassMember | Creates a table of contents structured by inheritance (classes and interfaces only, not members). |
| ARCDoc.Documentator.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.Documentator.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.Documentator.DocLinks | ARCDoc | ClassMember | Set by -CreateAndInsert-. |
| ARCDoc.Documentator.DocLinkResolutionLocation | ARCDoc | ClassMember | Default position within the global storage context of doc link resolution pages. |
| ARCDoc.DummyEnum | ARCDoc | Class | TODO: Document better what this is for (and change name) |
| ARCDoc.HLocationCollection.WriteAllContentHTMLToDisk | ARCDoc | ClassMember | Writes all -HLocation- results to a hierarhical folder structure as static HTML files with (optionally) -LinkInsertionInDocumentation-. |
| ARCDoc.HLocationCollection.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HLocationCollection.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HTOC | ARCDoc | Class | HTOC = Hierarchical table of contents. |
| ARCDoc.HTOC.Create | ARCDoc | ClassMember | Structures content hierarchically according to the criteria for each level. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload2 | ARCDoc | ClassMember | Alternative ('override') to -ToHTMLSimpleSingle-. |
| ARCDoc.HTOC.ToHTMLSimpleSingle Overload1 | ARCDoc | ClassMember | Use this method in any class where a table-of-contents type of view is desireable |
| ARCDoc.HTOC.CreateInitialContent | ARCDoc | ClassMember | Helper method for creation of a -FilterBranch-. |
| ARCDoc.HTOC.TryGetV | ARCDoc | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCDoc.HTOC.ToString | ARCDoc | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCDoc.HTOC.HTOCContentThisLevelKey | ARCDoc | ClassMember | The key used for storing the actual content at this level. |
| ARCDoc.PKDocAttribute | ARCDoc | Class | Describes documentation and presentation of a property. |
| ARCDoc.PKDocAttribute.Initialize | ARCDoc | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCDoc.PKDocAttribute.TryRemoveP | ARCDoc | ClassMember | Should probably never be used. |
| ARCDoc.PKDocAttribute.PriorityOrder | ARCDoc | ClassMember | |
| ARCDoc.PKDocAttribute.IsDefault | ARCDoc | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCDoc.DocFragType.Enum | ARCDoc | EnumMember | |
| ARCDoc.DocFragType.EnumMember | ARCDoc | EnumMember | |
| ARCDoc.DocLinkP | ARCDoc | Enum | Describes class -DocLink-. |
| ARCDoc.DocLinkP.Location | ARCDoc | EnumMember | The location that this link points to. |
| ARCDoc.DocLinkP.Filename | ARCDoc | EnumMember | |
| ARCDoc.DocLinkP.LinkWordHTML | ARCDoc | EnumMember | Actual link as it is expected to occur in text, like '-MyCustomerClass<T>-'. |
| ARCDoc.DocLinkResolutionP | ARCDoc | Enum | Describes class -DocLinkResolution- |
| ARCDoc.DocLinkResolutionP.LinkWord | ARCDoc | EnumMember | |
| ARCDoc.DocLinkResolutionP.DocLinks | ARCDoc | EnumMember | The possible links for -LinkWord- |
| ARCDoc.DocumentatorP | ARCDoc | Enum | Describes class -Documentator-. |
| ARCDoc.DummyEnumP | ARCDoc | Enum | TODO: Document better what this is for (and change name) |
| ARCDoc.DummyEnumP._MemberInherited | ARCDoc | EnumMember | Contains not only members which are inherited in the object-oriented sense, but also overrides for which the only documentation was found in base class |
| ARCDoc.HLocationP | ARCDoc | Enum | Describes class -HLocation-. |
| ARCDoc.HLocationP.Location | ARCDoc | EnumMember | Folder names / hierarchical levels. |
| ARCDoc.HLocationP.Filename | ARCDoc | EnumMember | Either the last hierarhical key for the content's location, or Index.html if no location. |
| ARCDoc.HLocationP.ContentType | ARCDoc | EnumMember | The type of the content object. The actual content object is stored as -Content-. |
Generated 2026-11-05 08:04:56.806 UTC