PSPrefix

Edit keys at this level only

Edit keys at all sub levels.
NOTE: Edits are always additive. Use 'Invalid' in order to delete keys.

__TOCDet/Assembly = ARCCore
__TOCDet/Description = Describes some recommended prefixed to use in a -PropertyStreamLine-.0x000D0x000Adt/ = data, cmd/ = command, log/ = log and doc/ = documentation.0x000D0x000A0x000D0x000AThese prefixes are not obligatory and not enforced by AgoRapide. Consider them as guidelines only.0x000D0x000ANaming is mimicking best practices used in for instance MQTT messaging.0x000D0x000A0x000D0x000ANote the general principle of containing application data, logging and documentation within the same data structure.
__TOCDet/DocFragType = Enum
__TOCDet/Name = PSPrefix
__TOCDet/Namespace = ARCCore
__TOCDet/Type = PSPrefix
__TOCDet/Attribute/AREnumType = OrdinaryEnum
__TOCDet/Attribute/AssemblyName = ARCCore
__TOCDet/Attribute/Description = Describes some recommended prefixed to use in a -PropertyStreamLine-.0x000D0x000Adt/ = data, cmd/ = command, log/ = log and doc/ = documentation.0x000D0x000A0x000D0x000AThese prefixes are not obligatory and not enforced by AgoRapide. Consider them as guidelines only.0x000D0x000ANaming is mimicking best practices used in for instance MQTT messaging.0x000D0x000A0x000D0x000ANote the general principle of containing application data, logging and documentation within the same data structure.
__TOCDet/Attribute/EnumNamespace = ARCCore
__TOCDet/Attribute/EnumType = PSPrefix
app/__TOCDet/Assembly = ARCCore
app/__TOCDet/Description = Application state, like app/0x000D0x000A0x000D0x000AApplication state means the actual internal state of application, and also logging.0x000D0x000ASee -ExposingApplicationState-.0x000D0x000A0x000D0x000AThese data points are normally not read from disk at application initialization.0x000D0x000AThey can however normally be accessed from the in-memory data storage as the application progresses.0x000D0x000A0x000D0x000ANote that logging is kind of inbuilt in AgoRapide.0x000D0x000AThe -PropertyStream- 'is' the log and if you need to insert additional log0x000D0x000Ainformation they are just new properties to be added to the stream.0x000D0x000A0x000D0x000AA logging console is likewise just a -Client- which subscribes to the whole or part of the -PropertyStream- (for instance like Subscripton = 'as/*'). 0x000D0x000ANOTE: You could have as many log-consoles as you prefer (each with different subscriptions), in order to follow specific parts of the system.0x000D0x000A0x000D0x000AIn addition to the inbuilt log-characteristics of the -PropertyStream- you can insert additional application state data points through two main methods:0x000D0x000A0x000D0x000AMethod A) Call to -Log- (this can also be instructed to log to the local console). Note overloads to this methods encouraging you to supply a set of data-points (set of (key, values) tuples), instead of just some loose text.0x000D0x000ATODO. GIVE EXAMPLE OF THIS.0x000D0x000A0x000D0x000AMethod B) Use a class like -PConcurrent- with concept of -Logger-, this will log any changes to the class (especially useful for exposing -ExposingApplicationState-).0x000D0x000A0x000D0x000ASee also -Log-, -HandleException-, -ExposingApplicationState-.
app/__TOCDet/DocFragType = EnumMember
app/__TOCDet/Name = app
app/__TOCDet/Namespace = ARCCore
app/__TOCDet/Type = PSPrefix
app/__TOCDet/Attribute/Description = Application state, like app/0x000D0x000A0x000D0x000AApplication state means the actual internal state of application, and also logging.0x000D0x000ASee -ExposingApplicationState-.0x000D0x000A0x000D0x000AThese data points are normally not read from disk at application initialization.0x000D0x000AThey can however normally be accessed from the in-memory data storage as the application progresses.0x000D0x000A0x000D0x000ANote that logging is kind of inbuilt in AgoRapide.0x000D0x000AThe -PropertyStream- 'is' the log and if you need to insert additional log0x000D0x000Ainformation they are just new properties to be added to the stream.0x000D0x000A0x000D0x000AA logging console is likewise just a -Client- which subscribes to the whole or part of the -PropertyStream- (for instance like Subscripton = 'as/*'). 0x000D0x000ANOTE: You could have as many log-consoles as you prefer (each with different subscriptions), in order to follow specific parts of the system.0x000D0x000A0x000D0x000AIn addition to the inbuilt log-characteristics of the -PropertyStream- you can insert additional application state data points through two main methods:0x000D0x000A0x000D0x000AMethod A) Call to -Log- (this can also be instructed to log to the local console). Note overloads to this methods encouraging you to supply a set of data-points (set of (key, values) tuples), instead of just some loose text.0x000D0x000ATODO. GIVE EXAMPLE OF THIS.0x000D0x000A0x000D0x000AMethod B) Use a class like -PConcurrent- with concept of -Logger-, this will log any changes to the class (especially useful for exposing -ExposingApplicationState-).0x000D0x000A0x000D0x000ASee also -Log-, -HandleException-, -ExposingApplicationState-.
app/__TOCDet/Attribute/EnumMember = app
app/__TOCDet/Attribute/EnumType = PSPrefix
cmd/__TOCDet/Assembly = ARCCore
cmd/__TOCDet/Description = Command, like cmd/
cmd/__TOCDet/DocFragType = EnumMember
cmd/__TOCDet/Name = cmd
cmd/__TOCDet/Namespace = ARCCore
cmd/__TOCDet/Type = PSPrefix
cmd/__TOCDet/Attribute/Description = Command, like cmd/
cmd/__TOCDet/Attribute/EnumMember = cmd
cmd/__TOCDet/Attribute/EnumType = PSPrefix
doc/__TOCDet/Assembly = ARCCore
doc/__TOCDet/Description = Documentation, like doc/.0x000D0x000ASee also -LinkInsertionInDocumentation-.
doc/__TOCDet/DocFragType = EnumMember
doc/__TOCDet/Name = doc
doc/__TOCDet/Namespace = ARCCore
doc/__TOCDet/Type = PSPrefix
doc/__TOCDet/Attribute/Description = Documentation, like doc/.0x000D0x000ASee also -LinkInsertionInDocumentation-.
doc/__TOCDet/Attribute/EnumMember = doc
doc/__TOCDet/Attribute/EnumType = PSPrefix
dt/__TOCDet/Assembly = ARCCore
dt/__TOCDet/Description = Data, like dt/0x000D0x000A0x000D0x000AThis is the actual data that your application stores, that is entities like 'Customer', 'Order', 'Hub', 'Device' or rather single properties like 'FirstName', 'Quantity', 'NetworkId' or 'Temperature'.
dt/__TOCDet/DocFragType = EnumMember
dt/__TOCDet/Name = dt
dt/__TOCDet/Namespace = ARCCore
dt/__TOCDet/Type = PSPrefix
dt/__TOCDet/Attribute/Description = Data, like dt/0x000D0x000A0x000D0x000AThis is the actual data that your application stores, that is entities like 'Customer', 'Order', 'Hub', 'Device' or rather single properties like 'FirstName', 'Quantity', 'NetworkId' or 'Temperature'.
dt/__TOCDet/Attribute/EnumMember = dt
dt/__TOCDet/Attribute/EnumType = PSPrefix

Edit single sub keys only: __TOCDet / app / cmd / doc / dt

Generated 2025-10-29 07:35:05.681 UTC